There are two ways to make door frames. Generally, the owners have no special requirements. The masters just make them horizontally and vertically and put them together directly. There is an extra 5 mm on the door frames. This is called making a mark.
Another kind of Ping Ping An, which is diagonally cut at 45 degrees and spliced diagonally. Ping Ping An\’s method is more complicated. You need to cut out 45-degree angles on both sides of the door frames and then splice them together. If it is not done well, It is easy to crack in the later stage. Generally, if the owner does not require it, the master will make it at right angles. However, French and European decoration must be made at 45 degrees. Flat door covers also look very good if they are made into simple right angles.
Share decoration tips every day~
本站内容及图片来自网络,版权归原作者所有,内容仅供读者参考,不承担相关法律责任,如有侵犯请联系我们：609448834
