Which door cover line style looks best, the one with a protruding edge or the one with a 45-degree butt joint? How to choose?

Today I answer a question from an owner who has just finished interior decoration. During the inspection of the door, I found that the master had installed the door cover line so that it protrudes upward, but what the owner wanted was the type where the two door cover lines are cut at a 45-degree angle and connected.

The owner asked what should be done in this situation. Should the door cover be remade?

Whether this problem is big or not, no matter what the door cover line is, it will not affect the normal use of the door. It is just that the owner does not like the door cover line and feels uncomfortable when he sees it.

The door frame of this owner’s house should look like the picture below.

Now that it is done, if you want to change it to a 45-degree angle, it will definitely not work. If you want to achieve 45-degree docking, you need to re-customize the top door cover line and the door covers on both sides. The line can continue to be used

There are not many materials required, but the door cover lines are all painted and processed in the factory, so the construction period may be relatively long.

The kind of door cover line and the 45-degree butt door cover line just posted are the two most mainstream methods now. As long as the owner does not take the initiative to request it, the master who installs the door will default to the one that is outstanding. This kind.

Because the installation of this kind of door cover wire is relatively simple, just saw the door cover wire according to the length. If you want to cut it at a 45-degree angle, you need to trim all the door cover wires. This is There will be some requirements for the master\’s craftsmanship

The principle of cutting the door cover line at a 45-degree angle is the same as that of plaster line cutting. Some masters may only need a few seconds to cut this angle, and it will look particularly beautiful after splicing, while some masters This corner can be tinkered with for half an hour, but the final result is not satisfactory. This is the difference in level.

There is no good or bad way to make door moldings, and there is no difference between beauty and ugliness. Everyone has their own preferences for carrots and vegetables. Which style of door moldings you like? It is best to tell them when ordering the door. The merchant must explain it clearly and write it down on the order. A good memory is not as good as a bad writing. Do not trust the merchant\’s memory. It is best to remind the merchant when installing the door to prevent mistakes.