Ansteel Construction Group Co., Ltd. has obtained the patent for industrial furnace door sealing device, improving the sealing effect of sealing doors to the furnace port.

Finance Industry News on February 17, 2025, Information from the National Knowledge and Rights Bureau showed that Ansteel Construction Group Co., Ltd. has obtained a patent titled \”A Industrial Boiler Door Sealing Device\”. Authorization announcement number CN 222481117 U, application date is May 2024.

The patent summary shows that this practical new model involves the industrial furnace technology field, and especially involves a door sealing device for industrial furnaces. This utility model includes a furnace body and a sealing door. One side of the furnace body is equipped with a sealing door. The inner side of the furnace body is equipped with a furnace opening at the corresponding position of the sealing door. The furnace mouth and the sealing door are fully cooperated, The body and the sealing door are equipped with a transfer mechanism. The transfer mechanism is used to connect the sealing door and the furnace port. The furnace and the sealing door are also equipped with an auxiliary mechanism, which is used to limit the sealing door. The relay mechanism includes mounting the side panel, positioning shaft, support arm and folding arm. This practical new model uses the structural design of the transfer mechanism and the auxiliary mechanism to facilitate the sealing door to the furnace, thereby improving the sealing effect of the sealing door to the furnace, and at the same time, it can provide auxiliary limits on the sealing door. This makes the sealing door more stable in the closure effect of the furnace opening.

Tianyan Check data shows that Ansteel Construction Group Co., Ltd., established in 2005, is located in Anshan City. It is an enterprise mainly engaged in housing construction. The enterprise registered capital is RMB 611.2 million, and the actual capital is RMB 583.8424.68 million. Through Tianyan Check data analysis, Ansteel Construction Group Co., Ltd. has invested in 15 companies in a total of 5,000 bidding projects, has 1 trademark information in terms of intellectual property rights and 206 patent information. In addition, the company also has 68 administrative licenses.

This article comes from the financial world

本站内容及图片来自网络,版权归原作者所有,内容仅供读者参考,不承担相关法律责任,如有侵犯请联系我们:609448834

(0)
华夏门网's avatar华夏门网
上一篇 2025年2月18日 12:35:05
下一篇 2025年2月18日 12:44:25

相关推荐

  • 提升门逐渐获得认可的原因

    提升门   自动提升门是一种专门用于工业建筑住宅的产品以其优异的密封性能和安全性能赢得了好评。它还依靠其高水平的智能来减少用户的担忧,从而使自动提升门的切换操作更加简单。那么,自动提升门被人们认可的原因是什么?   1、隔热性能好,外观大方   高品质自动提升门主要采用双层钢板,减少热能损失,防止室内冷空气快速分布或室外热空气渗透,从而获得更好的隔热效果。其…

    提升门 2023年10月3日
    500
  • 厂房一般使用什么样的工业提升门

    考虑到工业提升门常常会被选用于厂房仓库或者物流中心的外用门,这种采用厚重门板的就能很好地使用。工业提升门具有的抗风性能,在厂房安装时可以根据厂房空间灵活变通安装方法,达到占用少量厂房空间的效果。 工业提升门 工业提升门是沿着轨道路线开启的,日常开启关闭在20次以内是没有问题的,考虑到工作人员日常频繁进出的需求,可以在工业提升门门板中开设小门,起到高效的实用性…

    提升门 2023年10月5日
    850
  • 工業提升門的門體安裝註意事項

    工業提升門安裝的幾個註意事項: 1、工業門導軌的深度問題。如果導軌的深度不夠結構與用料不當,一旦遇到火災,門簾易從導軌脫出,起不到防火作用。 2、工業門的預卷問題,工業滑升門的門體比較重,所以會在卷軸上面預留一圈預卷。以減少工業門門簾重量對螺釘處的拉力.防止第一塊簾板破裂。 3、旭峰華夏門網工業提升門傳動裝置的強度問題,卷簾軸的強度問題卷簾軸強度也是卷簾門的…

    提升门 2024年9月16日
    90
  • 翻板車庫門鋼絲盤輪大小和扭簧輸出提升力之間的關系

    翻板車庫門鋼絲盤輪大小和扭簧輸出提升力之間的關系 8月18日,昆明海頓自動門業有限公司在東川區一收費站應急倉庫大門項目安裝過程中,出現扭簧配比力度不合適的問題,在公司業務交流群引發討論。 新媒體部門負責人丘兆濤丘總在工作群分享瞭鋼絲盤大小和扭簧輸出力之間的關系。他說,鋼絲盤越大越好嗎?並不是。同樣的扭簧,鋼絲盤越大,扭簧的輸出提升力就會越小。兩個同軸的鋼絲盤…

    提升门 2024年8月20日
    1030
  • 建筑特种工专题(六)——物料提升机司机

    物料提升机司机是指操作物料提升机进行载货工作的特种设备作业人员。物料提升机司机操作过程中存在起重伤害、物体打击、触电、机体倾覆等安全风险。下面小编给大家介绍一下物料提升机司机的岗位职责及安全操作注意事项。 01 物料提升机司机岗位职责 1.严格遵守安全管理规章制度、安全操作规程和安全技术交底,服从施工现场主管人员的工作安排,接受设备管理人员的安全监督和安全技…

    提升门 2024年5月4日
    410

联系我们

400-800-8888

在线咨询: QQ交谈

邮件:[email protected]

工作时间:周一至周五,9:30-18:30,节假日休息

关注微信