How to install and use emergency locks in a flip car door and open outdoor door after power shutdown

How to install and use emergency locks in a flip car door and open outdoor door after power shutdown

How do people open outdoors after the flip-flop car door after the power is stopped? Some, and only, open doors is to enable emergency locks on the warehouse door. When you are outside the door, you can use the emergency lock key on the warehouse door to manually open the door. If you forget to bring the key, stop the power inside, and the person is outdoors, three situations appear at the same time, and the parking doors cannot be opened outdoors, but you can still ask for help in opening the locking company with hope. If there is no installation emergency lock, there is no way to open the lock company.

It is worth mentioning that with the popularity of smart locks, now carrying keys with your body is no longer one of the necessities for the three-piece set. In addition, during the installation of the warehouse, the installation of emergency locks is relatively troublesome. , and the position of the lock hole may affect the overall appearance of the door panel, so some installation workers will take the initiative to solicit the opinions of the owners to make the owners decide whether to install emergency locks.

The suggestion of the Kunming Haiton Car Park is based on the construction site and make decisions based on respecting professional ideas and wishes. The current situation mainly includes two types: First, if you can enter the interior of the warehouse from the store, the emergency lock can be disabled, because the warehouse door is not the only channel to return; if it is an independent warehouse, the warehouse is inconsistent with the warehouse. The door becomes the only channel to enter the car database, so it is necessary to install emergency locks.

The power is stopped at the bottom, and the person is outdoor, but when he is wearing a key, he needs to use the key to open the emergency lock. At this time, the lock core is locked You can pull it out from the door panel, and connect a three-meter-long cord to the back of the lock core to continuously pull out the steel wire rope outward. The other end of the steel wire rope is connected to the clamp of the motor screw. Pull the steel wire rope outward to open the clamp manually. Then you can manually lift the door.

After entering the house, it is recommended to close the closure in time, and wait for the next time you come to the phone. If you hear the air switch of the motor, you don\’t need to panic. First check whether the closure is closed. If it is closed Then press the remote control key again, wait for the chain in the chain box to automatically run for about 10-20 seconds, and then you will hear the \”Kata\” sound of the snap-on joint of the clamp and the motor screw, and then the electric mode will Restore normal use.