Jiangsu Shida has obtained a patent for partitions with anti-unit structures to improve the safety of partitions.

Finance News on January 10, 2025, the Information of the State Intellectual Property Bureau showed that Jiangsu Sydar Autonomous Control Valve Co., Ltd. obtained a \”separation door with an anti-incidence structure\” patent, authorization announcement CN 222297127 U, application date is May 2024.

The patent summary shows that the utility model discloses an isolation door with an anti-unit structure, involving the technical field of the isolation door, including the installation frame, the isolation door main body, the cylinder and the connecting block, the installation frame\’s A partition main body is arranged on the inner side, connecting blocks are arranged on both sides of the partition main body, and a cylinder connected to the connecting blocks are installed on the mounting plates on both sides of the mounting frame. This practical new model is equipped with an anti-error mechanism. Since the movable plate is slidably connected to the mounting frame and the main body of the partition through the guiding groove, during repair, the movable plates on both ends of the movable plate can be pushed along the sling of the movable plate by pushing the movable rod to the inner side during repair. The guide groove slides and presses against the tight plate and the spring. When the latch plate and the slot are aligned, the movable rod can be rotated, so that the latch plate snaps into the slot and thus realizes the locking of the main body of the partition under the closed state. This will prevent the isolation door from being opened in an accident, improve the safety of the isolation door body during use, and thus ensure the safety of the inspection personnel.

Tianyan Check data shows that Jiangsu Zheshida Autonomous Control Valve Co., Ltd., established in 2015 and is located in Nanjing. It is an enterprise mainly engaged in general equipment manufacturing. The enterprise registered capital is RMB 10 million, and the actual capital is RMB 990,000. Through Tianyan Check data analysis, Jiangsu Sydar Autonomous Control Valve Co., Ltd. participated in bidding and tendering projects 10 times, had 2 trademark information and 14 patent information in terms of intellectual property rights, and the company also had 3 administrative licenses.

This article comes from the financial industry

本站内容及图片来自网络,版权归原作者所有,内容仅供读者参考,不承担相关法律责任,如有侵犯请联系我们:609448834

(0)
华夏门网的头像华夏门网
上一篇 2025年2月6日 12:05:18
下一篇 2025年2月6日 12:14:27

相关推荐

  • Daily use and maintenance methods of airport lifting doors and aircraft warehouse doors

    Daily maintenance methods for airport lifting doors and aircraft warehouse doors Recently, Kunming Haydun Automatic Doors repaired and maintained a batch of lift doors and aircraft…

    提升门 2024年12月15日
    150
  • 常州工业电动提升门

    品牌:西朗 常州工业电动提升门性能特点: 1.门板采用彩色钢板聚苯乙烯泡沫塑料夹芯板制作,适用于一般工业厂房、仓库、车库及辅助建筑通行车辆的场所。垂直提升门具有防寒保温、体轻承力、颜色齐全、坚固美观、运行平稳、安装方便、不占用下部空间等优点。门体可安装小门。通道小门一般设在右边靠中的一扇门板上(人站在室外)根据需要在门体宽度小于5500mm时,可以选配多种尺…

    提升门 2023年10月26日
    340
  • 工業門工業提升門的運行原理

    工業門為企業常用設施,適用於大型倉庫、物流行業、工礦企業等對於開啟速度、保溫、密封以及抗風等要求比較高的行業。 工業門工業提升門的驅動原理是: 工業門的運行使用專用電機帶動卷簾中心軸轉動,達到卷簾開關,當轉動到電機設定的上下限位時自動停止。 工業提升門由一系列門板組成,沿軌道上升,由扭簧系統或配重系統來保障門體平衡,軌道系統和提升方式的不同使其能適應不同的建…

    提升门 2024年8月31日
    140
  • 工业提升门使用时注意事项

    使用鸿发自动门的工业提升门过程中需要注意事项: (1)当长时间不使用时,请将提升门升至上限位置或关闭下限位置。 (2)在门运行前,请将通道小门关闭锁好。 (3)请不要用锐器划伤门体,定期用净布擦试门体。 (4)不要在活动中的提升门下方站立或者走动。这样的行为非常危险有可能造成人身伤害甚至死亡的后果。 (5)不要将手和手指放到铰链、导轨、弹簧等车库门部件活动区…

    提升门 2023年10月17日
    510
  • 开发商赠送面积靠谱吗?教你避坑,附“赠送面积”小科普

    案例一:开发商的承诺只见图示 基本案情 2018年,李某想买个“单身公寓”,于是来到湖南省岳阳市岳阳楼区一小区,向某房屋置业公司交纳了购房定金5000元。几天后,她在该置业公司工作人员的带领下参观了样板房,该样板房当时有阳台。从楼层平面示意图来看,自己所购房型也有阳台设置标志,并标明该部分为全赠与面积空间。 于是,李某当场与某房屋置业公司签订《商品房屋买卖合…

    提升门 2023年10月30日
    370

联系我们

400-800-8888

在线咨询: QQ交谈

邮件:[email protected]

工作时间:周一至周五,9:30-18:30,节假日休息

关注微信