What are the installation specifications of frameless glass doors? These accessories are missing

Whether it is a frameless glass door or a frame glass door requires accessories to support, so many friends will understand the installation specifications when installing the glass door. > Frameless glass door installation specifications and accessories related to accessories will be shared with you. I hope everyone likes it.

Frameless glass door installation specifications

1. Play line positioning:

At the beginning of the installation of the frameless glass door, the fixed glass partition and the activity glass door fan must be located. The door frame position is determined to accurately measure the ground elevation and the top of the door frame.

2. Install the limit slot of the top of the door frame:

Two metal decorative panel edges are led by the center line of the bomb, and then the front line is installed on the top of the door frame.

3. The wooden base of the metal noodles installed:

Plugs on the original pre -buried wooden brick, or the square wood is fixed on the ground through the expansion bolt. Then use a universal glue to stick the metal panel on the wood.

4. Installation of the door frame:

Plugs the door frame of the door frame according to the center line of the bomb, and then use the plywood to determine the shape of the shape and position of the door frame column. Then outsourcing metal decorative surface.

5. Glass door fan installation:

Use a glass suction cup (or glass suction cup) to suck thick glass tightly, and then hold the suction handle through 2 to 3 people to put the thickness through 2 ~ 3 people. The glass plate is raised and erected up to the installation location to prepare for the place.

6. Glass fixing:

Two flat square wood bars on the bottom and outside of the bottom of the bottom to clamp the thick glass in the middle, but the thick glass board needs to leave about 4mm or so The gap, then paint the universal glue on the flat square wooden strip to stick the metal board on the square wood and two flat square wooden strips.

7. Inject glass glue seal:

In the gap between the top grooves on the top of the top and the sides of the bottom glass slot and the seam of the seam of the thick glass and the door frame column Enter glass glue.

8. Docking between glass:

The fixed part of the thick glass plate, because the width size is too large, you must use two or more pieces to enterFormed, the two pieces of alignment stitching will inevitably form a seam. The distance between the seam should be 2 ~ 3mm.

Frameless glass Limen accessories

1. Glass door hardware accessories beauty: Door clip

The material characteristics of the glass door itself, so whether there are frame glass or frameless glass doors, you need to cooperate with different specifications to achieve switch. The door clip is an important type of glass hardware accessories type type First, the glass door is fixed from the upper and lower directions, which not only protects the glass] window [not deviated from the track.

2. Glass door hardware accessories: door lock

glass door] The door lock and door handle are separated. For security considerations Suitable. The I locks of different materials are different, and you must consider this when selecting.

3. Glass door hardware accessories: Holding pages

Hed hinge is the type of glass factory that all door products will be available] Hardware accessories type, which is the key to connect the door fan and door frame Essence However, due to the characteristics of different] products, the club hinges used in various doors are different. The united pages of the glass doors need to use a special] glass doors.

The above is the installation specifications and related details shared by Suzhou decoration today. I hope everyone likes,