Garage door engineers summarize the common fault solutions of remote control gallery door

With the development of reform and opening up with social progress, millions of households now have their own cars. Choosing a good garage door for their own garage has become the focus of many car owners. Old manufacturers in this industry have rich experience and experience. Garage door engineers summarize common fault solutions for remote control gallery door.

Fault 1

Phenomen P>

Solution: The operation is confirmed according to the code in the special prompts, and the code is re -code.

Fault 2

Phenomenon: Automatically open the door

Clear confirmation for operation and re -code.

Failure 3

Phenomenon: The remote control is not right. Solution: The distance between the remote control and the antenna is more than 1 meter when the code is paid.

Failure 4

Phenomenon: The garage door is automatically running repeatedly

Reason: The remote control button is pressed and the signal is always emitted.

Solution: Find the pressed remote control.

Failure 5

Phenomenon: The door body cannot be improved

Reason: There is no door (load) operation in the learning process, or it is not adjusted well well. The resistance of the door body. At this time, the force value of the door opening machine is small.

Solution: Confirm the operation according to the code in the special prompts, and re -code before running.

Failure 6 Remote control distance

Solution: Replace the battery or eliminate the interference source garage door remote control often occur during use. Method:

1. When the garage door remote control is pressed, the remote control indicator is not on, or the remote control indicator is very dark. Low low, after replacing the battery (note the positive and negative polarity). If the indicator light is still not bright, check the keys if it is damaged and oxidized (if some keys have reactions, some are not, the possibility is damaged by the key, or it may also be on the circuit on the circuit. The diode is damaged), and it may not work that the remote control is damaged. Are there any anti -anti -anti -battery contacts in the battery? In the north, touch the circuit board with your hands is easy to damage. Sometimes it is near, and it may be an electromagnetic wave interference in the surrounding environment. Nearly normal, there are also some industrial equipment such as high -weighing compressors. It can also produce great interference. If you are nearby, it will also cause the distance. If these interferences are excluded, check whether the receiving antenna is good.