What preparations do owners need to make in advance before installing electric doors?

What preparations do owners need to make in advance before installing electric doors?

A customer of Eaton Manor checked out the samples at the Hayden garage door showroom in May and signed an order for a flip garage door with two parking spaces. He paid an advance payment (deposit) of 5,000 yuan. After the Mid-Autumn Festival, he contacted the staff. He expressed the hope that he could help install it before the National Day in October. It is not convenient for construction during the National Day. Then Haydn garage door colleagues will come to provide door-to-door service, check the dimensions, place orders for production and installation. During this period, during the decoration process, what preparations do the owners need to make for the garage door opening, walls, and floor?

Size measurements. Before installing the garage door, can the door opening size in the floor plan be used as a reference for the installation area of ​​the electric door? The answer is yes. The dimensions measured on the Kunming Haydn garage door require accurate measurement of the width, height and height of the garage door opening. Detailed dimensions such as door stack thickness and distance from obstacles to the ground.

Rechecking the dimensions is crucial to selecting the appropriate electric garage door style and installation method. Only accurate data and a confirmed installation method in advance can ensure that the door can be installed accurately and operate normally. Generally speaking, review the dimensional requirements Measured data is accurate to millimeters, the width is measured from the inner clear dimension from one side wall to the other side wall, the height is the vertical distance from the ground to the top of the door opening, the door stack thickness is the thickness from the door opening to the inside of the wall, the detailed data of this size is for The installation method also plays a decisive role.

Clean up the site.After confirming the size, it is required to remove debris, obstacles, etc. in the garage and around the door opening before installation. On the one hand, this can provide enough operating space for the installers to facilitate their transportation and installation of equipment; on the other hand, In terms of safety, prevent debris from being mixed into the mechanical components during the installation process and affecting the normal use or construction of the garage door. Especially if the floor was painted or tiled last night, it is required to clean the dust and dirt around the door opening to ensure that the installation surface is clean and tidy, or Haydn will bring its own protective film, which will help improve the performance. The adhesion or sealing of the installation parts (such as sealing strips for better installation)

Check the structure of the door opening to see if it isVertical and flat. Before the installation work begins, Hayden garage door installers will level the door opening track installation location Test, if you encounter non-vertical or uneven door openings, it may cause problems such as excessive gaps and unsmooth opening and closing of the garage door after installation. If it is found that the door opening is obviously tilted or uneven, it needs to be repaired first, such as using cement mortar to level or correct the door opening frame. This is why some garage doors always have problems with jamming and loud noise after installation. The other is to confirm whether the strength and load-bearing performance of the door pillar are sufficient to support the weight of the electric garage door. For some larger or heavier garage doors, if the door opening wall structure is weak, it may need to be reinforced, such as adding support beams to the door frame.

Reconnect power. When the Kunming Haydn garage door was installed, the power cords were temporarily connected and tested. After that, subsequent use requires separate wiring. During the power preparation stage, make sure that the garage is powered on, especially that there is a suitable power socket in the garage. Electric garage doors usually require electricity to drive. Generally, the power supply is required to be standard AC, and the voltage and frequency must meet the requirements of the garage door motor (such as the common 220V). The location of the socket should be close to the installation position of the garage door motor. For example, the power socket for flip garage doors is required to be under the ceiling, and for rolling shutter doors, it is required to be on the side or top of the door opening. The purpose is to facilitate connection and avoid safety hazards caused by too long or short wires. Hidden danger or inconvenience of use.

After connecting the power cord, it is recommended to check the circuit. If the garage is newly built or the wiring has been modified, you need to check whether the wiring is laid correctly and there are no short circuits or leakage problems. You can ask a professional electrician to conduct testing to ensure that the power supply is safe and reliable when installing the garage door to avoid damage to the motor during operation.An electrical failure occurred during operation.

Coordinate installation times. Hayden garage door staff need to make an appointment with the decoration company or directly with the owner before installation. time, the installer must negotiate the installation time in advance to ensure that the owner or his client can be at the installation site. This can promptly solve problems that may arise during the installation process, such as temporary adjustments to the installation location, confirmation of the installation method, etc. At the same time, it is also convenient for owners to supervise the installation process and ensure installation quality.

Usage training before delivery. After the installation and debugging work is completed, Hayden garage door staff will clean up the garbage caused by the installation. Clean up, and then require the owner to go to the site for delivery and use training, such as remote control coding, motor stroke settings, how to use the infrared function, especially mobile phone remote control and other functions. The main thing is that it can be used smoothly after delivery. For example, some installation work may produce noise or dust, and owners can make corresponding arrangements in advance, such as notifying neighbors or taking dust-proof measures for indoor items.

After the electric garage door is installed and delivered, if you have any questions during use, you can contact any Kunming Haydn garage door staff at any time. Consult and handle after-sales issues.