Entering the core module of the space station from the spacecraft? Astronauts must pass through these four gates →

June 17

The Shenzhou 12 manned spacecraft

launched off from the Jiuquan Satellite Launch Center

and Achieving autonomous rapid rendezvous and docking with the Tianhe core module

Astronauts Nie Haisheng, Liu Boming, and Tang Hongbo

entered the Tianhe core module one after another

In the process

How many doors did they pass through in total?

Let’s learn together

↓↓↓

01

After completing the rendezvous and docking

The astronauts must first open the

The door of the return module of the Shenzhou 12 spacecraft

Arriving at the orbital module

Entering the core module of the space station from the spacecraft? Astronauts must pass through these four gates →

02

At this time, the front end of the orbital module

and the front end of the core module of the space station

p>

The docking mechanism between the circular node modules forms a passage 80 centimeters in diameter and about 1 meter long

Astronauts pass through this passage

Finally enter the core cabin

Entering the core module of the space station from the spacecraft? Astronauts must pass through these four gates →

Want to play To open the front door of the orbital module

Astronauts must first adjust the air pressure on both sides of the door

to balance the pressure in the aircraft cabin

to facilitate astronaut entry Docking channel

03

After entering the docking channel

The astronauts need to open the docking channel The front hatch of the cabin

This door cannot be opened casually

According to reports

A special \”key\” is required to open this door ”

“The key has a larger handle

which can reduce the difficulty of opening the door”

Entering the core module of the space station from the spacecraft? Astronauts must pass through these four gates →

The astronaut floating in the docking channel

Twist the \”key\” twice and a half times

You can push the door open and enter the node module

04

Finally

The astronauts returned You need to open the rear hatch of the node module

That is, the \”two-way pressure hatch\”

Officially enter the core module

Start a three-month space life

Source: CCTV News

本站内容及图片来自网络,版权归原作者所有,内容仅供读者参考,不承担相关法律责任,如有侵犯请联系我们:609448834

(0)
华夏门网的头像华夏门网
上一篇 2025年1月19日 10:03:20
下一篇 2025年1月19日 10:07:26

相关推荐

  • 无轨悬浮门的制作有哪些流程?

    无轨悬浮门的制作有哪些流程?相信不少人是有疑问的,今天深圳市开门红科技有限公司就跟大家解答一下! 一、确定用料 无轨悬浮门定制主要用材一般包括三个方面:铝型材、钢材、五金件。 好的悬浮门产品所选的铝型材,其厚度、强度和氧化膜一般都能够符合国家标准,比如说国家相关规定要求,悬浮门的铝型材壁厚在不低于1.2mm以上,氧化膜厚度应达到10微米。 而特种钢材要比普通…

    悬浮门 2023年9月19日
    420
  • 悬浮折叠门出现故障维修时要注意 什么?悬浮折叠门维修

    悬浮折叠门是一款无轮子接触地面,无运行轨道,无需预埋导轨,悬空行走的门,在使用时,难免会发生故障,那么发生故障要怎么弄?以下详细概述下悬浮折叠门维修时需要注意的事项: 1、发生故障时应由专业人员进行维修或与供货方和生产厂联系维修,以免故障扩大影响使用。 2、发现悬浮折叠门开门和关门方向相反时将控制器的“V”“W”端子接线对调即可,同样STOP显示屏指示方向与…

    悬浮门 2023年11月2日
    650
  • 裝修“盲目跟風”,犯下4條裝修失誤,新房入住吃啞巴虧

    文案編輯:老曾 裝修一套房子,少的需要住上5到10年,多的住上10幾20年也是常見現象;我們在裝修時多註意1分細節,就會為日後生活帶來10分的便利。 但是在實際裝修中,往往由於我們缺少主觀上的考慮“盲目跟風”,導致房子裝好入住後卻發現不實用的現象常見存在。 比如下面這4條,就是缺少主觀考慮‬“盲目跟風”的產物,房子入住後隻能自己吃啞巴虧瞭。 沒有考慮層高,盲…

    悬浮门 2024年8月30日
    780
  • 方程豹全新概念跑车发布,配悬浮双翼蝴蝶门,搭载碳纤维骨架

    ​近期,方程豹汽车春季发布会如期举行,而在本次发布会上方程豹汽车正式发布了一款全新的概念跑车——方程豹SUPRE 9,新车属于一款Speedster品类跑车,不仅有着酷炫帅气的外观,还配备悬浮双翼式蝴蝶门,并配备碳纤维骨架,据悉新车将会在即将开幕的2024北京车展上正式亮相,新车究竟实力如何呢?根据我们获得的信息,接下来就一起来了解了解吧。 作为方程豹打造的…

    悬浮门 2024年4月25日
    360
  • An invisible door creates an exquisite and restrained DINK home

    Design / Quality / Life Temperature of Love When I first got the design manuscript of the house plan, I later discovered that the house was a brick-concrete structure and the cloak…

    悬浮门 2025年1月8日
    200

联系我们

400-800-8888

在线咨询: QQ交谈

邮件:[email protected]

工作时间:周一至周五,9:30-18:30,节假日休息

关注微信