Install door frames yourself. Wow, it’s so easy.

For people who want to install wooden door covers themselves, the installation process can be unfamiliar. Overall, there are only two steps to install the wooden door cover. The first is to install the wooden door cover, and the second is to install the wooden door cover into the doorway. It seems like a simple two steps, but there are some issues that need to be paid attention to when installing it yourself.

1. Installation of wooden door covers

1. First check all parts and parts of the wooden door cover to see if there are any omissions. Generally, wooden door covers Will include 1 top frame, length About 823mm; 2 side frames, length 210mm; door frame line; front door frame line; rear door frame line; silent strip; door stop line; fixed iron sheet; expansion screws; wood screws, etc. Make sure all parts are in order

2. After inspection, assemble the top frame and side frame. There will be processed fixing steps at one end of the side frame, and there are drilled holes for fixing. After the two side frames are aligned with the top frame, they are fixed with wood screws. There will be countersunk holes on the sides of the frame, which are fixed with expansion screws. After the left and right side frames are fixed, a through groove can be cut out at the joint with a knife and saw to facilitate the smooth passage of the lines.

3. Use a temporarily fixed piece of wood under the wooden door cover to correct it so that the wooden door cover forms a vertical square.

2. Door opening installation

1. After the wooden door cover combination is fixed, it can be installed in the door opening. . Adjust the gaps between various parts, use wooden wedges to adjust the level, and tighten the door frame.

2. If expansion screws are used during installation, use an impact drill to align the expansion screw holes on the side frame and drill holes at the corresponding positions on the wall. Install the expansion screws and tighten them. If it is installed with fixed iron sheets, drill holes in the corresponding reserved positions and lock them with self-tapping screws.

3. After the fixation is completed, the gap between the door cover and the wallFill the gaps with cement slurry or foam glue.

4. After the filled cement slurry or foaming agent dries, remove the excess and the temporary fixed wood can be removed.

5. Glue the front door frame line and the rear door frame line to the corresponding positions of the door frame, and cut the layers at a 45-degree angle at the corners.

<img src=\"https://p3-sign.toutiaoimg.com/6972/3470494972~tplv-tt-origin-web:gif.jpeg?_iz=58558&from=article.pc_detail&lk3s=953 192f4 & degree angle.

7. Use a nail gun to nail the door stop line to the door cover line and fix it. Then fix the door stop line and silent strip. The final effect is that the door stop line just presses the seam of the front and rear door frame lines.

8. Clean the surface of the wooden door cover and complete the installation of the wooden door cover.

Xiao Niu Decoration Comments: According to the above steps, the installation of wooden door covers is still very simple. If you want to install it yourself, you can also know it well. Another thing to note is to measure the size of the door opening first to avoid the wooden door cover and the door opening not fitting together.

Welcome to subscribe and follow [Mavericks Decoration]