ZPMC obtained the invention patent authorization: \”A door frame manufacturing method for a double-car quayside container crane\”

Securities Star News, according to Tianyancha APP data, Zhenhua Heavy Industries (600320) has newly obtained an invention patent authorization, the patent is called \”A door frame manufacturing method for a double-car shore container crane\” ”, the patent application number is CN202210896765.2, and the authorization date is January 3, 2025.

Patent summary: The invention discloses a door frame manufacturing method for a double-car shore container crane, which includes the following steps: S1. Pre-positioning and anti-deformation assembly of the free edges of the wing plates on the rail-bearing beams Gap; S2. During the column assembly stage, draw three reference measurement points of the centerline of the sea and land sides on the column; S3. During the post-welding stage of three-sided forming and welding, correct and adjust The verticality of the column; S4. In the post-welding stage of the four-sided forming and welding, arrange the adjustment horizontal datum of the column; S5. Measure the straightness of the column on the sea and land sides; S6. In the stage of turning the column over 90°, Measure the process requirements of the column; S7, when the column turns over 90° again, trim the allowance of the column and install the flange plate; S8, assemble the left and right door frames. This invention improves the structural accuracy of each component by formulating requirements for marking, measuring, and inspection of the door frame structure, and ensures that the double trolley quay crane door frame is accurately assembled in place at one time.

Since the beginning of this year, ZPMC has obtained 15 new patent authorizations, an increase of 650% compared with the same period last year. Based on the company\’s 2024 interim financial data, the company invested 625 million yuan in research and development in the first half of 2024, a year-on-year increase of 39.96%.

Data source: Tianyancha APP

The above content is compiled by Securities Star based on public information and generated by intelligent algorithms (Network Information No. 310104345710301240019) and does not constitute investment advice.

本站内容及图片来自网络,版权归原作者所有,内容仅供读者参考,不承担相关法律责任,如有侵犯请联系我们:609448834

(0)
华夏门网's avatar华夏门网
上一篇 2025年1月7日 08:06:57
下一篇 2025年1月7日 08:09:41

相关推荐

  • 门套线是什么?木门门套|门扇|门套线超详细安装教程

    门套线这个结构提起来,可能很多人都会感到疑惑?自家室内门上还有这个东西吗?门套线可是对是室内门组成非常重要哦!下面,重庆装修网小编就带大家来认识木门门套线尺寸。 一、木门门套安装 安装门套的注意要点: 1、组装门套前需在地面平铺珍珠棉、保护膜,防止组装过程中门套漆面划伤。将门套的横框与竖框连接牢固,T50直枪钉固定。 套板之间缝隙要严密、平整、无错位;竖框与…

    门套门框安装 2023年10月4日
    3960
  • 门套的做法中,蕴含不同的寓意,你更喜欢哪种?

    装修是一个系统而复杂的工程。小到家里的开关插座,大到墙面地板。当我们在确定好家装风格后,对于家里大面积的装修,也许会存在不同的看法。比如说,家里装木地板还是铺贴瓷砖,墙面是刷乳胶漆还是贴墙布?还有,乳胶漆颜色的选择等等。不同的选择,最终所呈现的效果会有所不同。在门套做法这一个小细节上,也是一样的道理。那么,今天艾美加小编想跟大家聊聊门套的做法与其中所蕴含的寓…

    门套门框安装 2023年11月11日
    3050
  • 原来门套要这么装才牢固,邻居围观我家师傅安装过程回家立马改了

    现在虽然轻硬装重软装,木工工程也被减少了许多,但这实际上是为剩下的木工活提出了更细致的要求,今天就开看看木工中的包门套具体是怎么做的。 第一步就是先确定位置,用红外线水平仪在墙上标出水平线,测量出门洞的大小,两边用墨斗弹垂直线。 量好位置之后就在两侧的垂直线上钻孔。深4cm,钻两个孔,间距为40cm。 钉入小木楔用来固定门板的。 这里是用细木工板做门套,量好…

    门套门框安装 2023年10月13日
    920
  • How much does a household solid wood door cover cost per meter? How to choose solid wood door cover?

    Everyone who has a solid wood door at home must know that a solid wood door requires a solid wood door cover. However, the first thing everyone is more concerned about when buying …

    门套门框安装 2024年12月30日
    80
  • 門套這樣安裝才牢固,永遠不用擔心後期會有開裂問題

    門套每個朋友在裝修中都能做到,雖然門套的材質有很多種,但是有一個問題卻是共同的,就是在我們後期使用中,容易出現開裂問題。可能有的朋友認為,出現這種情況,是門套本身質量的問題。而事實上,這和師傅的安裝方法也是有關系的。比如下面這位師傅的安裝方法就很好,經過瞭解,師傅說門套這樣安裝才牢固,永遠不用擔心後期會有開裂問題。 我們從師傅的施工過程中可以看到,第一步是先…

    门套门框安装 2024年8月29日
    610

联系我们

400-800-8888

在线咨询: QQ交谈

邮件:[email protected]

工作时间:周一至周五,9:30-18:30,节假日休息

关注微信