What is the door cover line? Wooden door frame｜Door leaf｜Super detailed installation tutorial for door frame line

When it comes to the structure of the door frame line, many people may be confused? Do you still have this thing on your interior door? Door cover lines are very important to the composition of interior doors! Below, the editor of Chongqing Decoration Network will introduce you to the dimensions of wooden door casings.

1. Installation of wooden door covers

Points to note when installing door pockets:

1. Before assembling the door pockets, pearl cotton and protective film must be laid flat on the ground to prevent assembly. The paint on the door cover was scratched during the process. Connect the horizontal frame and mullion frame of the door frame firmly and fix them with T50 straight gun nails.

The gaps between the cover panels should be tight, flat, and free of misalignment; the connection between the vertical frame and the horizontal frame should be at a 90-degree angle, and the verticality of the door cover diagonal, front and side installation of the cover line is required to comply with company specifications operating requirements.

2. If the wall cavity does not have a wood base layer, the wood base layer should be made first.

2. Installation of wooden door door sleeves

1. Before installing the door sleeves, foreign objects in the slots of the sleeves should be cleaned first. When cleaning, pay attention to the corners of the slot not to be damaged, and then apply nail-free glue on the door cover line and install it into the slot of the door cover (frame).

2. The door cover line adopts a 45° angle. The interface should be kept smooth and tight, and the splicing should be natural and smooth without misalignment. When cutting the sleeve line at a 45° angle, be careful to prevent edge explosion. Professional and good articles, all in the door industry.

3. Apply nail-free glue to the contact area between the door cover line and the wall. The nail-free adhesive is applied by dots. The distance between the two points should not exceed 25cm to ensure that the door cover line and the wall are firmly combined. If the nail-free adhesive is exposed, it should be removed promptly.

4. The cover wire fixed on the cover board should be as close as possible to the wall; due to the non-vertical wall or uneven thickness, there will be a gap between the door cover wire and the wall. Please ask the decoration company to close the gap in time, and Gun nailing is prohibited on the front of the set.

3. Wooden door leaf installation

1. Open the corresponding door leaf packaging and check whether the size, color, and opening direction of the door leaf comply with the size, color, and opening direction of each part required by the production operation book. Whether there are bumps, indentations, scratches, or mispackaging, and whether the hardware that needs to be installed is correct and complete. Professional and well-written, all in the door industry.

2. Distinguish the upper and lower openings of the door leaf. During installation, the bottom of the door leaf needs to be padded with pearl cotton and cannot directly touch the ground. The installation must ensure that the door gap distance is 3mm at the top and 7mm at the bottom.

3. Adjust the hinge to the best state to ensure that the door leaf can be opened easily, without friction, the door leaf can be opened and closed flexibly, and the door leaf is flat and vertical; after the door leaf is closed tightly, the sealing strip is tightly combined and does not swing.

During the trimming process of the hinge grooves on the door leaf and door frame, the paint on the surface of the door leaf and door frame must not be damaged. When installing the hinge screws, you should first guide the holes, then use a screwdriver to screw in the screws and install the screws. Take the positive cross direction as the standard.

4. Check the height difference between the door frame and the door frame and the door frame line; whether the height difference between the door leaf and the door frame, and the door leaf and leaf joints meet the size requirements; the door leaf and the upper frame, side frame, Whether the gap between the floors meets the required dimensions. After installing the door frame, check the verticality of the door frame and the squareness of the upper and lower door frames to facilitate the installation of the door leaf.

5. Install the lock to the corresponding position according to the provided lock. After the lock is installed, check whether the door leaf and door lock switch are flexible and whether there is any jitter. If necessary, adjust the lock position in time. The door sucker should be installed firmly and securely. There is looseness. The handle should be installed vertically without tilt, and the hinge should be installed firmly.

The above is the installation tutorial of the wooden door cover shared by the editor. The three structures are different, and they combine together with their own advantages. A complete wooden door.