Detailed explanation of door frame decoration steps. Is it good to make door frames for solid wood doors?

Doors play an important role in the home. Choosing a good door can not only play a role in sound insulation and warmth preservation, but also embellish the indoor environment and play a finishing touch. However, the installation of the door is inseparable from the installation of the door frame, which plays a decisive role in the door. So now the editor will tell you about the detailed explanation of door frame decoration steps. Is it good to make door frames for solid wood doors? What are you waiting for? Come and take a look with the editor!

Function of the door frame

1. The original function was to fix the door leaf and protect the corner (because the previous wall had no or very few doors now) Such high-quality wall paint needs to be protected). But now this problem no longer exists, and the actual functional needs have been lost, and it has become a purely personal aesthetic need.

2. It is often used in the decoration process to protect doors from scratches, corrosion, damage, dirt, etc. It is usually tailor-made, and the above Printed with the basic information of the decoration company for advertising, the quality is environmentally friendly, high quality and low price.

Detailed explanation of door frame decoration steps

1. Measure the thickness of the wall, the width and height of the door opening, the door opening is based on the narrowest point, and the wall thickness is based on the widest point Measure and then measure the length of the top frame of the finished door frame and the length of the frame. The top frame covers the two frames. The inner width between the two frames should be 6mm larger than the width of the door leaf. The inner height between the top frame and the ground should be 13mm higher than the height of the door leaf. After confirmation, proceed with the top frame and frame. Place the connection into the door opening and reserve the hanging legs.

2. Electrically hammer the reserved nail holes in the long-frame door wire trough to drill holes into the wall. The depth and width of the holes should be appropriate to the size of the matching expansion screws. Nail the expansion screws. .

3. When fixing the door frame, you must use a hanging wire to make the long frame vertical. Check whether the long frame and the top frame are at a 90-degree angle.

4. Preliminarily fasten the door line (but do not paint white latex, and adjust the angle as a precaution).

5. When installing the door leaf, first fix it with 1 screw at the top and bottom. Check whether the door leaf is of appropriate size and whether the door leaf and door frame can be opened and closed freely. After confirmation, install the required screws.

6. After making sure that the door leaf and door frame are installed accurately, remove the door wire, brush it with white latex, and reinstall it. If the door wire is not very strong when installed (the glue has not dried yet), you can use both ends. pointedNail-assisted connections.

7. The installation of the line can It depends on the width of the wall and door frame. If the wall is narrower than the frame, the side with the wider side of the line and side can be placed against the wall. If the frame is narrower than the wall, vice versa. Covering nails and cover nails can be removed on both sides of the line and line. , use nails to fix the back cover and put it back.

8. After installing the door lock, pay attention to a comprehensive inspection to see if the door leaf is flexible and whether the gap is in compliance. Note: Corner wall and T-shaped wall door openings should use door sets that are 60mm to 100mm wider than the door opening size. Use wood during installation and make a \”fake wall\” with a width of 60mm to 100mm.

Can solid wood doors be used as door frames?

The door frames surround the borders and upper sills on both sides and top of the doorway. They are set on the wall and usually support the door leaf. Generally speaking, solid wood doors are better for door frames.

Key points for the installation and construction of solid wood doors and door frames

1. For vertical wood doors, the position, elevation, model, and door frame specifications of the door frame on the construction drawing must be clearly seen. The opening direction of the door leaf and whether the door frame is flat on the inside, flat on the outside, or in the wall must be set according to the diagram.

2. When erecting the frame, pay attention to using a line hammer to find and lift it straight, and check whether it is tilted or moved.

3. When erecting the frame, pay attention to the thread, and the lower end of the support pole should be fixed on the wooden pegs.

4. The gap between the door frame and the masonry should be filled with cement mortar.

5. Check the size, verticality and quantity of wooden bricks of the block door opening. If there are any problems, deal with them in advance.

———————I am gorgeous Beautiful dividing line———-

For more exciting content on home decoration design and layout, please stay tuned to Qijia.com (