How to install silicone sealing strips on glass doors and windows?

How to install glass doors and windowsSilicone sealing strip? First of all, when installing sealing strips on glass windows, there are many things to pay attention to. For example, the sundries in the depressions should be cleaned out. In addition, the rubber sealing strips of the glass windows should not be pulled too tight or the size should not be too large to avoid damaging the sealing performance of the window. At a discount, let’s take a look at the installation method of silicone sealing strips for glass doors and windows:

1. Glass windowSilicone sealing strip , gasket strips and retaining strips: (window frames and sash) welding (joints) and angles are cleaned, use a special roller to push the strips in the correct direction with very small force Notch the profile until the insertion of the strip enters the profile notch. Because the rubber strip is elastomer, it can shrink after rolling. The solution is: when installing the rubber strip on both ports, shrink both ends of the rubber strip slightly towards the middle, leaving a shrinkage margin of 2-3 cm, and then cut the rubber strip into the groove.

2. Glass windowsRubber sealing strip, manually screw the end of the strip into the mold cavity according to the correct surface, and then press the exposed surface of the strip into the gap between the glass and the profile, leaving After it is 1-2 cm long, shrink the strips at both ends slightly towards the middle, then cut them, and seal the window according to the installation method and precautions of the window sealing strips.

Through the above understanding, you should be familiar withRubber and Plastic ProductsNow that you have more information, if you have any other questions, please call and write to the relevant technical consultants of Shenzhen Qiyu Silicone Rubber Co., Ltd. You are also welcome to update Professionals call to discuss industry knowledge

This article is from Shenzhen Qiyu Silicone Rubber Co., Ltd.: http://www.qygxj.com/show.asp?nid=2531

If you like this article or find it helpful, please share it with your friends ^_^