How to install wooden door covers, door covers, and door fans?

Viewpoint 01

Ideal points for installing door covers

1. Before installing door covers, you must lay pearl cotton and protective film on the floor to prevent door paint from being put in place during the installation process. Injury to the plan. Connect the frame of the door sleeve firmly to the frame, and fix the T50 straight gun. The gap between the sleeve plates should be tight, flat and free of errors; the connecting frame and frame are at a 90-degree angle, which requires the verticality of the door angle line, the front and side installation of the sleeve to meet the operating requirements of the enterprise specifications.

2. If the hole is not made into a wood base layer, it should be made into a wood base layer first. .

Schematic diagram of ordinary door set installation

View point 02

Door set line Installation tips

1. Before installing the door sleeve, clean and clean the anomalies in the notch of the sleeve plate. When cleaning, please note that the corners of the notch cannot be damaged, and then apply the door sleeve to the no-gel. Insert into the slot of the door (frame).

2. The door sleeve line adopts a 45° angle, and the interface should be kept flat and tight, so that it is naturally smooth and smoothly spliced ​​without errors. At the angle of 45°, the sleeve is deliberately prevented from bursting.

<p class=\"pgc-img-caption\" 3. How to touch the door sleeve and the wall surface No glue, no glue is used to press the glue. The distance between the two points cannot exceed 25cm, so that the door sleeve and the wall are firmly combined. If the glue is exposed, it should be removed in time.

4. The sleeve line fixed to the sleeve plate is as tight as possible to the wall; due to the non-vertical or uneven thickness of the wall, there is a gap between the sleeve line and the wall. Please close the gap in the decoration company at the same time, and guns are prohibited from being fired on the front of the sleeve.

Viewpoint 03

Door installation tips

Important points

> 1. Open the corresponding door fan package and check whether the door fan size, color, and opening direction meet the size, color, and opening direction required by the production workbook. Whether there are bumps, pressure marks, plans, and errors in each part, and it needs to be installed. Is the hardware correct?

2. Distinguish the upper and lower openings of the door fan. When installing, pearl cotton must be placed under the door fan. It cannot directly touch the ground. The installation must be guaranteed to be 3 upper and 7 lower and 3mm door distances on the left and right.

3. Adjust the page to the best state, and ensure that the door fan is opened lightly, without friction, and closeFlexible and free, the door fan is flat and vertical; the door fan is tightly connected and does not move. The paint on the surface of the door fan and door frame must not be damaged during the renovation of the door fan and door frame. When screwing the upper page, first draw the hole, then screw the screw in with a screw cutter, and install the screw in the right cross direction.

4. Check the height difference between the door sleeve and the fan cutout and the door sleeve line; whether the height difference between the door fan and the door frame, the fan and the fan meets the size requirements; the door fan and the upper frame, the side frame, Whether the floor spacer meets the required size. After installing the door frame, check the perpendicularity of the door frame and the squareness of the upper and lower door frames to facilitate the installation of the door fan.

5. Install it to the corresponding position according to the provided locks, check the door fan after the locks are installed, Whether the door lock is flexible, there is no shaking phenomenon. If necessary, adjust the position of the locking tool in time. The door suction installation is firm and must not be loose. The handle installation should be vertical, without any oblique appearance, and the combined page should be installed firmly.

Some pictures come from the network. If there is any infringement, please contact and delete