What are the temperament of titanium magnesium alloy doors and windows?

What qualities do titanium-magnesium alloy doors and windows have? The term \”it mainly depends on temperament\” is very popular on the Internet, but in the titanium-magnesium alloy doors and windows industry, it is an era of mainly looking at quality. As competition among product homogenization intensifies, how to choose high-quality titanium-magnesium alloy doors and windows has become a headache for consumers. Jiameilai has compiled some information on choosing titanium-magnesium alloy doors and windows, hoping to help everyone!

1. Look at the materials. The profiles, profile thickness, profile strength and profile oxide film used in high-quality titanium-magnesium alloy doors and windows should comply with relevant national standards. The wall thickness of the main stress-bearing rods of titanium-magnesium alloy doors and windows should be above 1.2mm. The wall thickness of the main stress-bearing rods of titanium-magnesium alloy doors should be above 2.0mm. The tensile strength should reach 157 Newtons/square millimeter, and the yield strength should reach 108 Newtons. /mm2, the oxide film thickness should reach 10 microns. Remember: if it does not meet the above standards, it is inferior titanium-magnesium alloy doors and windows and is not recommended for use.

2. Look at the processing. High-quality titanium-magnesium alloy doors and windows are not only finely processed and installed, but also have good sealing performance and can be opened and closed freely. Inferior titanium-magnesium alloy doors and windows have no requirements for the selection of profile series and specifications, and the processing is shoddy. Milling is replaced by sawing. The installation is not as required, the sealing performance is poor, and the opening and closing are not free. Not only does it leak air and rain, the glass bursts, but also When encountering strong wind and external force, it is easy to scrape or knock down the sliding part or glass, damaging the object.

3. Look at the price. Generally speaking, due to high production costs, the price of high-quality titanium-magnesium alloy doors and windows is about 30% higher than that of inferior titanium-magnesium alloy doors and windows. Some titanium-magnesium alloy doors and windows are made of aluminum profiles with a wall thickness of only 0.6-0.8mm. Their tensile strength and yield strength are far lower than relevant national standards and are unsafe to use. Choose products from regular titanium-magnesium alloy door and window manufacturers. Here is a special note: the national standard profile thickness is 1.2mm. If the supplier chooses a material with a wall thickness of 1.0mm or even thinner, it is an unqualified product, so please pay attention when purchasing.

4. Look at the material. There are six main aspects for reference in the material of titanium-magnesium alloy doors and windows:

1. Thickness: Titanium-magnesium alloy sliding doors and windows are available in extremely narrow series and ordinary series, both of which can be used in residential interiors. The material thickness of titanium-magnesium alloy sliding doors is between 2.0-3.0mm. It is a high-quality door. The profile thickness of ordinary titanium-magnesium alloy sliding doors is between 1.2-1.8mm.

2. Strength: The tensile strength should reach 157 Newtons per square meter, and the yield strength should reach 108 Newtons per square meter. The profile can be bent moderately when purchased and can be recovered after letting go.

3. Color: The color of the same titanium-magnesium alloy profile should be consistent. If the color difference is obvious, it is not suitable to buy.

4. Flatness: Check the surface of the titanium-magnesium alloy profile to see if there are no dents or bulges

5. Glossiness: When purchasing titanium-magnesium alloy doors and windows, you should avoid profiles with obvious defects such as open bubbles (white spots) and ash (black spots), cracks, burrs, and peeling on the surface.

6. Degree of oxidation: The thickness of the oxide film should be 10 microns. When purchasing, lightly scratch the surface of the profile to see if the oxide film on the surface can be wiped off.

In this era that mainly depends on product quality, quality life starts from details.