Solid wood door processing demonstration and solid wood door manufacturing tool application

In this example, the door needs to be assembled with longitudinal wood according to the specifications of 2100X900X44mm. Before making the door, the wooden strips should be cut to the following dimensions:

A. Upper inner baffle (10 pieces) : 72X1193X37 each

B. Lower inner baffle (10 pieces): 72X608X37 each

C. Upper and lower rungs (2 pieces): 115X900X44 each

D. Middle rung (1 piece): 115X830X44

E. Frame (2 pieces): 115X2100X44 each

Tools required: a set of door frame knives, a door panel knife, a mortise and tenon knife and a groove knife.

1. First prepare a splicing knife to cut a total of 20 upper and lower inner wooden strips

2. First lift the finger joint cutter head 2.5mm, and then cut the other side of the upper and lower inner rails into a serrated surface;

3. Use glue Specifies together.

4. , A depth of 103mm, thickness 8mm

img src = \”https://p3-sign.toutiaoimg.com/ca4000405369979FFA0~tplv- origin-web:gif.jpeg?_iz=article.pc_detail&Lkk3s = 953192F4 & X-EXPIRES = 1738288419 & X-Signature = R%2BT1FRP9W% 2ftcrlqbkj%2BFJB9miqi%3d \”/>

5. The door frame knife processing up and down stalls, first do a convex tenon on the side of the wooden bar. -sign.toutiaoimg.com/ca5000119442d69cc5e~tplv- origin-web:gif.jpeg?_iz=58558&FROM=artICLE.PC_DETAILK3S=953192F4&X-EXPIRES=1 738288419 & X-Signature = LACOQAQYB8JYV7T7T7MFM64GWFZFS%3d \”/>

6. Flip the other side to do the remaining bumps

7. Do tenon at the other end of the upper and lower horizontal stalls;

8 . Do tenon in the middle of the processing;

9. The tenon mouths are opened on both sides of the horizontal stall; TPLV-TT-Origin-Web: GIF.JPEG? _IZ = 58558 & From = Article.pc_detail 2zeoxvxevrnyosi%3d \”/>

10. Single-sided vertical cutting;