Automatic luxury revolving door manual

Overview of the two-wing doors:

As the top product in the revolving door industry, the two-wing revolving door not only gives people a sense of generosity and style, but also creates a luxurious atmosphere. Its spacious open facade and high-style design can be called the beauty of the building. The finishing touch, unshakably based on the forefront of the architectural era. With its special functions and unique design, people working there can enjoy the convenience and comfort brought by modern technology. The two-wing revolving door has both rotating and opening functions. It has a scientific and reasonable mechanical structure, low noise, low power consumption and smooth operation. The core part adopts world-renowned products with reliable performance and excellent quality.

System features:

■ Continuously variable speed control.

■ Large starting torque.

■ Slow start and slow stop.

■ Intelligent positioning.

■ Intelligent parking position.

■ Low operating noise and smooth operation.

■ Low friction, low wear, long service life long.

■ Effectively prevents the door from being pushed after locking it occurrence, improving the safety performance of the door.

■ Take full advantage of belt and gear reduction , and effectively suppress its shortcomings.

■ The revolving door is driven by dual motors. More reliable.

■ The sliding door adopts advanced DC brushless The motor, worm gear and worm reducer are integrated with high efficiency.

Large torque and long life.

■ The design of braking first and then driving makes the brake Better sex.

■ Modular design, reasonable structure and maintenance convenient.

Drive mode:

■ AC variable frequency drive mode.

Function:

■ It has an emergency stop method; it is convenient to press in an emergency,

■ Safety anti-pinch/anti-collision method to ensure pedestrian safety.

■ Disability priority mode;

■ Slow-speed constant rotation mode;

■ Lighting control mode;

■ Sensing intelligent speed adjustable method;

■ Three door parking positions

■ Three opening/closing modes for sliding doors;

■ Fire emergency mode; the door automatically switches to the open state when encountering a fire signal.

■ Set password control mode;

■ No entry or exit locking method;

■ Input/output status monitoring mode; displays all status and fault information during door operation.

1, Disability Slow down button. When people with disabilities or large objects pass through the revolving door, press the deceleration button and the automatic door will enter a low-speed operating state to facilitate pedestrians to pass smoothly. After running at low speed for a period of time, the revolving door will automatically enter the normal state.

2, emergency stop button, used for emergency stop Purpose, when the emergency stop button is pressed, the revolving door will stop immediately. Hold the emergency stop button and rotate it 90 degrees clockwise. The emergency stop button will reset and the revolving door will resume operation.

Schematic diagram of the location of the revolving door sensor ：

Revolving door sensor The number of device groups varies according to the door body requirements and customer requirements, which will be determined when the contract is signed

The number of groups in the attached configuration list shall prevail.

Revolving door sensor functions:

1. Sensors are activated inside and outside the door and are responsible for the operating signal of the revolving door. The sensor senses the messageNo., the revolving door operates at rated speed.

2. The sliding door activates the sensor, which is responsible for the operation signal of the middle swing door. The sensor senses the signal, and the swing door opens or closes with the set function.

3. The outer ring and inner ring rubber strips prevent pinching. When the automatic door column rubber strip is squeezed and deformed, the sensor located inside the rubber strip receives the signal, and the revolving door immediately stops running and reverses slightly. When the deformation of the rubber strip returns to its original state, the revolving door resumes operation.

4. Rotating wing anti-pinch and light curtain anti-pinch, the revolving door immediately stops running after receiving the signal, the signal disappears, and the door body returns to normal operation.

5. The location area is anti-pinch. When the rotating wing of the revolving door enters the position area and senses a signal in this area, the revolving door immediately stops running and reverses operation. The signal disappears and the turnstile returns to normal operation.

Attached are the locations of each position sensor Detailed picture:

Instructions for use of automatic doors:

1. Power supply requirements, AC220V 50HZ ground wire reliably grounded.

2, temperature range -20°C–+35°C

3, relative humidity ≤80%

4, rain is not acceptable,

5. There must be no high-temperature heat sources or strong earthquake sources within 10 meters of the automatic door

6, no corrosive gas erosion

7, strong impact is not acceptable

8. There should be no strong electrical interference or magnetic field interference nearby.

Precautions for the use and maintenance of automatic doors:

1. During the cleaning process of automatic doors, no hard objects may collide with or twist the rubber strips to avoid damage to the electrical components inside the rubber strips

Broken.

2. When using the exhibition box door, be sure to lock it tightly to avoid damaging the door during operation

The door opens and collides, damaging other door leaves.

3. The top of the revolving door must not leak to avoid damage to the electrical appliances in the electrical box.

4, rotateThe stainless steel exterior decoration of the revolving door must not be wiped with a wet cloth or hard objects.

5. When the revolving door is running, Hand pushing is strictly prohibited. It will cause the control circuit current to be too large and the inverter to fail.

Maintenance, the electrical box controller stops working.

Warning:

1, To avoid the risk of electric shock, please use grounding equipment properly and disconnect power when installing, moving, or opening this product\’s electrical equipment or door covers. The power cord should be connected to a power switch with reliable grounding, and the power supply voltage must comply with the requirements of this manual.

2, to ensure the correct use of this product , the manufacturer\’s relevant requirements must be followed during use, operation and maintenance. If the automatic door fails, it should be operated according to the requirements of the manual and the professional technicians assigned by the company should be notified immediately.

3. When using the automatic door, please Follow the danger signs of automatic doors and do not stay or play inside. Children should be accompanied by an adult to pass quickly. The company does not assume any responsibility for any direct or indirect injuries and losses caused by misuse of automatic revolving doors.

4, any unauthorized modification of the automatic door body Once discovered, the company will be out of warranty liability and out of lifetime maintenance.responsibility for protection.

5, make sure that the door body is There should be no foreign objects in the internal space and any factors that may hinder the operation of the door, such as the open state of mechanical electric locks.