Briefly describe the safety protection device of industrial lifting doors

There are four main safety devices for industrial lifting doors, namely spring break protection devices, airbag induction devices, wire rope break protection devices, and infrared radiation safety devices (optional).

(1) Spring breakage protection device

The torsion spring is the balance system of the industrial lifting door. Controls the door body to remain parallel when running up and down. If the spring breaks accidentally, the balance of the industrial door body will be destroyed, causing the door body to fall and a major accident to occur. This device can block the balance shaft when the spring breaks, thereby preventing the door body from falling.

(2) Steel wire rope breakage protection device

Generally speaking, the steel wire rope will not break. However, the disc may come off. After the disc is removed, the wire rope will become loose. In the event of such a situation, the wire rope breakage protection device will clamp the side rails of the industrial door to prevent the door body from falling and avoid safety accidents.

(3) Airbag sensor device

Safety airbags are generally installed at the lower edge of the door body of Huaxia Door Network\’s industrial doors. The airbags are usually in a saturated state. During the closing process of the door body, once an obstacle is encountered, excessive pressure will cause all the gas in the airbag to be absorbed. Squeeze it out, and the door body of the industrial sliding door will immediately rebound and move upward under the action of the device to prevent obstacles from being caught and causing accidents.

(4) Infrared radiation safety device (optional)

In industrial sliding doors There will be a set of infrared beams on the body, emitting an infrared beam. When the door body runs downward, if it is blocked by obstacles, the beam cannot be connected in a straight line, and the safety protection system will issue instructions to make the door The body automatically rebounds and runs upward until it returns to the open state.

Briefly describe the safety protection device of industrial lifting doors

本站内容及图片来自网络,版权归原作者所有,内容仅供读者参考,不承担相关法律责任,如有侵犯请联系我们:609448834

(0)
华夏门网的头像华夏门网
上一篇 2025年1月13日 08:57:06
下一篇 2025年1月13日 09:07:36

相关推荐

  • 工业厂房垂直提升门的开关门速度是由快变慢的过程

    工业厂房垂直提升门的开关门速度是由快变慢的过程 在电动门行业工作了一年才发现,相较于涡轮硬质快速门和翻板式电动车库门,工业垂直提升门的开关门速度竟然是由快变慢的过程,而且这个速度变化的过程还是非常明显的。 我亲自测试了一下,垂直提升门在开门的时候,启动速度非常快,三秒左右即可行人通过,五六秒钟叉车可以进出,6秒之后速度放缓,大概10秒左右大货车可以进出,然后…

    工业门 2023年11月11日
    190
  • Safety operating procedures for industrial lifting doors (industrial sliding doors)

    Industrial lifting doors play a great role in improving the working environment. They mainly provide high sealing through the entire door body and the door seams on all four sides …

    工业门 2024年12月14日
    280
  • What are the types of industrial rolling shutter doors?

    The types of industrial rolling shutter doors we choose can be said to be very rich. Today, the editor will introduce to you the classification of rolling shutter doors that are ma…

    工业门 2025年1月14日
    250
  • 工业门的门板结构及操作方法

    工业门设计目标是针对那些需要坚固的具有良好热绝缘性能以及能节省空间的工业厂房外墙用门的客户。华夏门网工业门启动时向上滑升到室内天花板下,可以不占用室内任何空间,能有效地提高室内的空间利用率。 工业门门板由双层热镀锌钢板制成,中间填充以六组份聚氨酯发泡涂层,具有良好的保温隔热性,能有效地保护门板不受恶劣气候环境的侵蚀,而工业滑升门门板表面的各种纹路设计能最大程…

    工业门 2023年11月7日
    200
  • Specific detailed parameters of industrial lifting doors

    Industrial development has grown significantly in recent years, and there is also a huge demand for corresponding factory doors. Lift doors are a frequently used exterior door for …

    工业门 2024年12月31日
    260

联系我们

400-800-8888

在线咨询: QQ交谈

邮件:[email protected]

工作时间:周一至周五,9:30-18:30,节假日休息

关注微信