The uniqueness of the hospital environment makes the requirements for selecting hospital doors much higher than those for ordinary doors. So what are the functional requirements for special doors for diagnosis and treatment? Below, professional and technical personnel from hospital door manufacturers will explain it. I hope that the following detailed introduction will be helpful to everyone.

1. The design plan stipulates: internal switch door or electric sliding door, door width; 900mm (single opening) or 1500mm (double opening), height 2100mm, door panel thickness 40-50mm. Sound insulation and noise reduction index; 36dB. Thermal insulation and airtight performance: comply with environmental protection and energy saving requirements. You can choose from swing doors, sliding doors or electric sliding doors. Door opening and closing position: inward opening or outward opening. Sliding door hardware equipment: antibacterial door locks, hinges, door closers, etc. The hardware opens and closes 2 million times. Electric sliding door hardware equipment: fully automatic or fully automatic calibration guide rails, door locks, and antibacterial door handles. The hardware opens and closes three million times, and the door frame contains a double-layer observation window.

2. Functional requirements: The hospital\’s clinic can be said to be a very important space for all patients to have direct contact with medical staff. The diagnosis and treatment area of ​​the hospital is also an area where groups gather and the natural environment is relatively complex. It is crucial to set up safe passages for group inflow into the clinic and for medical staff to enter and exit. In addition to the basic requirements for medical doors, such as durability, easy opening and closing, antibacterial and easy cleaning, in the current new era, the number of patients is increasing day by day, and they have new features when changing from waiting rooms to treatment rooms. role requirements. What we often see is that in the clinic, in addition to the patients who have been called, there are often patients waiting in the waiting room or temporarily seeing a doctor with various problems. The clean and private hospital environment and Discipline evaporates, and doctors and patients inevitably face such situations with anxiety. Therefore, we believe that medical-specific doors should be equipped with electronic access control controlled by doctors.

3. Strength requirements: The ward door series is a part of the entire category that has relatively high durability and frequency requirements. In addition to strict durability requirements for the structure of the door frame and door leaves, there are also requirements for the interface between the door frame and the wall, as well as for all hardware equipment, to require a lot of durability requirements. In some hospital departments with high application frequency, everyThe door frame opens and closes more than 100,000 times a year. Therefore, when choosing a hinge door lock, we should make standardized requirements for its durability. For example, the door lock uses Level 1 standard, two million times.

4. Special hospital door design requirements: For example, in the pediatric diagnosis room: for children and adolescents, consideration must be given to raising the window, and the window height should be as low as possible to facilitate observation at the discharge port. To prevent children from being knocked down, the door hinge side of the door frame and the door lock side need anti-pinch functions. Metal deadbolts can cause collision damage to children, so try to use safety locks.

5. Double-open automatic door electronic access control: A wired and wireless network access control system controlled by a doctor. For example, the electronic access control regulations in the clinic are more stringent, and there are also regulations on cleanliness levels and zero pollution, which are generally extremely large. Most hospitals use foot pedal or magnetic induction opening and closing methods.