Detailed introduction of Yunchang electric sliding door

The electric sliding door operates in the entire section, with an overall beautiful appearance and strong wind resistance. It is generally used for unit gates, factory gates, and schools. Gates, courtyard gates, etc.

1. Yunchang multi-section sliding doors can be customized according to special needs , choose one-way stacking or two-way push-pull;

2. The door frame is made of special steel according to the area and aspect ratio of the door leaf, and the door panel is made of double-sided color steel plate;

3. The material is thickened, and the bottom beam material reaches 4.0mm thickness , which is sturdy and durable, has strong wind resistance, thermal insulation, and the surface is corrosion-resistant and anti-fouling. The color and pattern of the door panel can be customized according to user needs;

4. Lighting windows and passage doors can be opened according to user requirements ;

5. Using sliding contact lines, a heating system can be installed on the guide rail in northern or cold areas;

6. Install airbags on both sides of the door leaf. When encountering an obstacle, it will immediately reverse to fully open. At the same time, an infrared detection device can also be installed. When the sliding door is moving and obstacles pass through the door opening, it will automatically stop moving.

7. The opening method adopts frequency conversion system, with light control and remote control , manual and other forms. Manual and electric can be quickly and freely switched. Frequency control can make the door body in operation.When the operation button is pressed, the door body can stay in any position;

8. An opening and closing warning light is set above the door frame of Yunchang Industrial Sliding Door, which will automatically flash when it is opened or closed, and a delay switch is installed. A delay switch is installed on the control box. In an emergency, the button can be pressed to activate the door. The door stops.