How to choose hospital door hospital ward door

Hospital door is a door for special industries. How to choose when customizing is something that every user should pay attention to. Choose the color of the door: Choose the appropriate color according to the nature of your hospital. General hospitals generally choose light colors and light wood grain colors, which are suitable for the public\’s eyes. When choosing the color of the door, you should also pay attention to matching with the color of the wall, such as The effect of matching them together is very important as in painting. I have done experiments and just renovated In order to allow users to choose their favorite color, each room is painted with diatom mud paint in cool, warm and neutral tones. Each room feels different when you enter it, especially in the warm tones. , has a warm feeling, the cool-toned room is a bit cold, and the neutral room is calmer. Selection of surface: The simplest method is to scratch the surface of the door panel with something relatively hard. If no trace is left, it means the surface is okay. Use an ordinary lighter to burn the material on the surface of the door panel. If it does not burn, it means the material is anti-scratch and flame retardant. function. Generally, the panels of hospital doors are pressed with soft linen technology to increase the anti-scratch function. Door leaf filling: There are many people coming in and out of hospital wards, and hospital beds are pushed in and out frequently, sometimes bumping into the door leaf. The internal filling should be above 96% so that the door leaf is anti-collision, not too heavy, and does not deform. , it is better to use a 30X30 square grid, and a stainless steel anti-collision tape is attached to the surface of the door leaf to make it stronger. Selection of hardware: The hardware of the hospital door should be chosen with good handles because they are needed for entry and exit. Problems can easily arise. The handles should be U-shaped to avoid hanging in the pockets of doctors and nurses. Three stainless steel hinges should be used on the door. The hospital is a place where disinfection is very important. Sprinkling disinfectant on the door leaves will cause corrosion and lead to quality problems over time. Selection of door covers: The waterproof solid wood step cover on the back of the door cover is stronger and easier to install. With the aluminum alloy insert plate buckled on, the entire door cover will be protected from cracking and deformation and can be used for a long time. Verification of documents: \”Business License\”, whether there is a production license, \”Inspection Report\” of formaldehyde content and antibacterial report. Finally, take a comprehensive look at the production process, including the 90-degree angle treatment of the aluminum alloy buckle of the door leaf, the production process of the door leaf, hot pressing or cold pressing, and the advanced level of the production equipment. Regarding the glue used for gluing, this will allow you to choose a more suitable product.