Buying doors and windows, installation is the key! Doing it is wrong, leakage and wind are very common

I believe everyone has this feeling that when we purchase doors and windows, we only pay attention to the quality of the doors and windows themselves.

For example, most of our friends will pay attention to the materials of doors and windows, the specifications of doors and windows, and the prices of doors and windows. The installation of doors and windows is often overlooked.

However, everyone should be clear: 30% of the quality of doors and windows depends on 70% of installation. This sentence is not said for nothing. Because a series of problems such as water leakage and air leakage occurred later, most of them occurred during the installation.

So, let’s follow the home miscellaneous forum Let’s learn how to choose doors and windows from installation to installation.

(1): Assembly

The first step in installing doors and windows in your home should be door and window assembly.

Many of the doors and windows we purchase for our homes are transported to our homes in a dispersed state and then assembled at our homes.

In the process of door and window assembly, what we need to focus on is the seams between profiles.

A good one When doors and windows are assembled, the profile joints should be even to achieve an almost seamless effect.

If the window is found to have obvious gaps or uneven gaps in size after assembly, it is unqualified.

So after the windows are installed, everyone should focus on checking the assembly effect. The key point is the seams between the profiles.

How-to guide

①. After the materials come into the site, we must check whether they are damaged before assembly is allowed.

②. After the profiles are assembled, we must inspect them one by one. Re-assemble the unqualified requirements, and installation will not be allowed until all are qualified.

(2): Fixed

The second step in indoor window installation is the fixing of the windows

For example, you will see us. When installing windows at home, the windows are assembled and then placed in the opening.

The window is placed on the opening and is temporarily fixed. At this time, use a special plug to adjust the horizontal and vertical angles to ensure that the gap between the window frame and the wall is even. .

For example, it is most reasonable to have a gap of about 5mm between the window frame and the wall, and the gaps on each side should be basically the same. Some gaps cannot be large and others small.

Only after the gap is adjusted evenly can it be fixed. When fixing, use special expansion bolts between the holes reserved in the window frame itself and the wall, at least on each side. There are two fixed points.

So, whether the quality of window fixing is good or bad depends on the gap first and the fixing points on each side to ensure that the window is firmly fixed and the gaps are uniform. This is the quality. Good installation.

How-to guide

①. Before fixing the window frame to the wall and preparing to apply foam glue, everyone must check it carefully. It is not allowed to apply foam glue directly without inspection.

②. During inspection, we canGo to the usage of the window with your hands to see if it is firm. If it is loose, it is recommended to reinforce it again.

③, check the fixed point on each side of the window frame. For example, there are at least two fixed points on each side of the conventional window frame. If it is a floor -to -ceiling window, there are four fixed points on the left and right sides of the window.

( 3): Filling

Fill, it is estimated that many friends have ignored this. It is considered that the windows can be sealed after installation, but it is not.

After the window and the wall are fixed, there must be a step to fill the gap between the window frame and the wall.

The gap is filled. First of all, choose the appropriate material, that is, foam glue. We use foam glue to fill all the gaps, and the foam glue should protrude from the gap.

Everyone here focuses on, It is not allowed to fill the cement mortar in the gap. Therefore, the gap between the window frame and the wall is also stared at by everyone. The key to water leakage

Operation Guide

① Before filling the gap, it is recommended that you let the installer clean up the gap in the gap. Clean. ;-TT-Darkmode-COLOR: #1A74FF; \”> ②, when passing the glue, should be uniform and full, try to make the foam gum protruding in the window frame. \”36\”> ③. For the openings of the window frames, everyone must retest them in advance. For large size deviations, use cement to retest them. Leveling.

(4): Sealing

The last step in indoor window installation is to apply sealant

Window sealant consists of two major components. Part: The first part is the sealant between the window frame and the wall; the second part is the sealant between the glass and the profile.

Sealant is directly related to the sealing effect of our windows. For example, whether the window will leak or whether the window will leak is determined by the sealant.

The common way to apply window sealant is to apply the outer sealant first, and then apply The sealant on the inside of the window frame, and then the glass sealant. Of course, you can also apply the glass sealant first.

What everyone focuses on here is the sealing effect, such as whether it is even and full, whether there is cracking, and whether there is any breakage.

Operation Guide

① Before applying sealant, be sure to clean the parts corresponding to the sealant. For example, wipe the profile surface of the window clean and the glass circumference clean. There are also Wipe the wall around the window frame clean. No dust is allowed.

②. When applying glue, it must be formed in one go.For example, when we apply sealant on the outside, we must apply it continuously along the circumference. Try to avoid stubble, and if there is stubble, try to be on it. p>

</

Write at the end of the text

The quality of the windows, most of which depend on the installation of the window. It is the installation process of the window. Although the windows are very good, the installation is constant. Infringement contact is deleted]