How many lifting methods are there for industrial lifting doors?

How many lifting methods are there for industrial lifting doors?

Kunming Haydun industrial lifting door is an industrial door commonly used in industrial plants, workshop doors, logistics loading and unloading ports and other places, because the factory area requires high door opening frequency, fast door opening and closing speed, wear resistance, strong wind resistance, etc. Therefore, the opening methods of industrial lifting doors installed in different places are also different.

First of all, the first one is standard lifting, which is our most common copy of the lifting door. If the clearance height of a factory door is five meters, and the total height of the factory is only about 5.5 meters, then you can directly use standard lifting installation method, so the standard lifting is suitable for door top space within: 200-300mm.

The second type is high-level lifting, which is mainly suitable for door top spaces greater than 300mm. For example, if the door clearance is 5 meters, and the total height of the factory is about 8 meters, then the industrial lifting door can be opened upwards 3 The vertical height of meters is flipped overGo to 2 meters, this method is high level lifting.

The third type is vertical lifting, which is suitable when the space at the top of the door is greater than or equal to the height of the door opening. For example, if the height of the door opening is 5 meters, and the total height of the factory building is more than 10 meters, then the door panel can be opened directly vertically. This method of installation is called vertical lifting.

These three are the lifting methods of industrial lifting doors and sliding doors. The specific situation is analyzed in detail. The user can determine which lifting method should be used according to the height of the door opening of the industrial factory and the total height of the factory.