Is it better to choose a sliding door or a revolving door for the hotel door?

The hotel door is not only the facade of the building, but also the first service experience for customers, so a good automatic door is crucial to the hotel door. Some customers don\’t know whether to choose a sliding door or a revolving door for the lobby entrance. Below, Xi\’en two-wing revolving door customization manufacturer will analyze the advantages and disadvantages of these two types of doors for everyone.

Some hotels choose sliding doors because they occupy a small area and are cheap. Its operating principle is very simple. When someone passes or enters the sensing area, an instruction will be sent to the control system to control the opening of the door frame. When pedestrians or objects leave the sensing area, the door will automatically close.

However, sliding doors have certain limitations, and the wind resistance of the installation location is relatively high. If the hotel is located in a wind outlet or a place with strong wind and sand, it is not suitable to install sliding doors. Wind and sand blowing into the hall will cause sand and dust to accumulate, making it difficult to take care of it.

The mode of the revolving door itself is normally open and normally closed. The revolving door will not bring dust into the room when it is running. In addition, the revolving door is energy-saving and airtight, which can ensure that the cold and warm air indoors and outdoors do not circulate in summer and winter.

In addition, the safety performance of revolving doors is higher than that of sliding doors, and they are equipped with special safety buttons such as emergency stop, anti-pinching, and disabled people. However, the revolving door has a smaller flow of people than the sliding door. The disposable door leaf can only pass 6-12 people. If there is an emergency, congestion may occur.

In summary, revolving doors have more advantages than sliding doors, and many hotels now install two-wing revolving doors, which have the functions of both sliding doors and revolving doors. The revolving door function is used when there are few people in the hotel or in summer and winter, and the sliding door function is used when there is a large flow of people or in spring and autumn.

The revolving door enhances wind resistance and reduces air conditioning energy consumption. It is the first choice for isolating air flow and saving energy. Xi\’an Electric has the annual production capacity of various types of electric partitions, automatic doors, revolving doors,It has the manufacturing capacity of more than 20,000 sets of induction doors and supporting doors. If you need customized revolving doors, you can contact Xi\’an Electric Revolving Door Manufacturer.