What aspects should be considered when choosing an industrial lifting door?

What aspects should be considered when choosing an industrial lifting door?

1. Lifting method:

1. Standard lifting method: only suitable for spaces above the door top within 200MM or 300MM .

2. High-level lifting method: Most of the door top space is greater than 300MM and less than the door opening height H.

3. ​​Vertical lifting method: The installation requirement is that the top space of the door is greater than or equal to the height of the door opening.

4. Sloping roof lifting method: As long as the ceiling has a slope shape, the track and the ceiling are Parallel status.

2. Materials of various components of industrial lifting doors:

( 1) Lift door panel;

(2) Lift door hardware accessories;

(3) Lift door balance system;

(4) Lift door safety protection device;

(5) Seal strips. Industrial lifting doors are suitable for food, medicine, electronics, printing, etc. Supermarkets, etc., because these workshop areas have high requirements for cleanliness and require regional isolation. At the same time, industrial lifting doors have beautiful appearance, high strength, safety and reliability, low noise, good sealing, and good insulation. They can save factory space and improve production efficiency. features, so it has been widely used in the industry.