How much does a ward door generally cost? [Medical Bell] Is the ward door medical door a hospital-specific door?

How much does a ward door generally cost? [Medical Bell] Is the ward door medical door a hospital-specific door? How much does a ward door cost? Ward doors are mainly used in public spaces in hospitals. They are special places in hospitals where there is a large flow of people and dense patients, so collisions or cross-infections are prone to occur. Ward doors have very strict requirements in terms of materials, air tightness and other aspects. There are many brands of hospital ward doors sold on the market today, with varying price levels and varying quality. [Yi Bell] has been focusing on manufacturing special hospital doors for 17 years, and the old brand has a trustworthy reputation. Is the size of the hospital ward door different from that of ordinary room doors? There is a difference. The general design of the ward door size is M1321, and the width generally needs to be 1.3 meters to ensure that the hospital bed can pass through. The overall effect of the hospital ward door is as follows:

1. There are no scratches, bumps or other trauma on the surface of the entire door.

2. The color is consistent with the customer\’s requirements, with no obvious color difference. The color is bright and the wood grain is clear.

3. The entire batch of doors has the same color with no obvious color difference. Meet customer gloss requirements.

4. The surface has no sagging, shrinkage holes, swelling edges, wrinkles, line corners are basically consistent with the surface, abrasion and other defects.

5. The size of the entire door is consistent with the size of the opening.

6. The coloring of both sides of the wooden door is consistent, with no obvious difference.

7. There are no obvious processing marks and no coloring defects on the coating surface.

8. Produced according to drawings and processing technology, with real materials.

9. Hospital doors should be flat, square and without warping. Comply with tolerance requirements (national standards).

10. The combination between product components should be tight, firm, seamless, and inactive.

11. The hinge installation is not skewed, holes are drilled according to the mold, and the keyhole position is accurate.

12. The line shape is uniform; the groove depth is consistent and there are no waves.

13. The door panel installation gaps are even and meet the requirements. The door cover is installed squarely and not skewed.

14. The door opens flexibly and without any abnormal noise.

15. Use sealant to seal the space between the door pocket and the wall on both sides, and cut it flat after drying.

16. Use fixing screws between the door frame and the wall, no less than every meter.to 3.

17. The sets of wires on the same side should be on the same plane, and the gap should be filled with sealant.

18. The cable sleeve interface must be flat, and the allowable tolerance for the cable sleeve curvature is 1 mm.

19. After the door leaf is closed tightly, it is tightly integrated with the sealing strip and does not swing.