How to install a set of doors? What are the precautions for installing indoor set doors?

Set doors are mainly made of new materials made of solid wood. They are widely welcomed by owners because they are easy to match. So How to install set doors to save trouble? What aspects should be paid attention to when installing a set of doors? Let’s take a look below!

1. Door frame installation method

First of all, determine the thickness of the wall in your home. Generally speaking, the frame after 30 cm is suitable for 12, 15, 18 , 21, 24cm thick wall, of course before installation, first Check whether all components are present, such as top frame, side frame, door frame line, door stop line, screws, etc. In addition, use a processed 9×18mm fixing step on one side of the two side frames, and drill two Small holes are made to facilitate the fixing of wood screws, and a temporary fixed wooden square is placed below to assist in correction, so that the door frame becomes roughly vertical and square.

2. Door opening installation

Put the previously assembled frame into the door opening, and adjust the distance between the two sides and the top, and then use Level and straighten the wooden wedges and tighten the door frame. It is best to fill the space between the wall and the door frame with foam glue or cement slurry, then use universal glue to paste the door frame line and rear door frame line to the door frame, and adjust the depth of removal according to different wall widths, and finally use a nail gun Nail the door stop line to the door frame line. After fixing it, press the door stop line buckle strip and silent strip.

3. Door leaf installation method

1. Preparation work

For the placement of door leaf, we must first clarify In the direction of opening the door, secondly, check the level and verticality of the door opening. Of course, you need to pay attention to whether the wall is dry enough and whether the door leaves and door frames are separated by pads. This can effectively avoid thermal deformation. In addition, pay attention to before construction. Whether the wall part where the door is installed is horizontal or vertical, and it must be prepared at the endInstallation tools, please read the installation instructions in the product package carefully before installation.

2. Measurement data

During construction, be sure to measure the dimensions of the door opening and door leaf. Generally speaking, the size of the door leaf Thickness standard is 38, 40 , 45mm, the height is the height of the door opening minus 5 to 10mm, the width is the space inside the door frame minus the reserved gap for the door leaf; the width of the door is the width of the door leaf plus the width of the door cover line, the width of the door opening is the width of the door leaf plus the reserved gap for the door leaf plus the thickness of the door frame main board Add the thickness of the door frame solid board and the door frame adjustment amount.

3. Start installation

First mark the auxiliary lines on the wall, then conduct a simulation test on the frame, and adjust until the components are completely consistent. , then put the door frame line into the wall hole. The edge of the door frame and the top of the door frame are at a 45-degree angle. Make sure that the two sides of the door frame are parallel and vertical and level with the top of the door frame. Then grind and fill the convex and concave areas between the door frames on the wall behind the door frame. Gaps, plastering and tiles on walls.

The above is the relevant introduction on how to install set doors shared by Kunming Zhuangyi.com this time. I hope it will be helpful to your home decoration. Friends who want to know more about decoration can make detailed consultations. , many high-quality decoration companies are waiting for you to choose.