What are the differences between original wood doors, solid wood doors, composite doors and WPC wood plastic doors? Jiangsu Melaleuca wooden door

With the rise of the national economic level With the increase in people\’s consumption levels, the doors commonly used in home decoration are generally divided into two categories: original wood doors, solid wood doors, composite doors and wood-plastic doors. When the wooden store shopping guide tells you that there are so many varieties of wooden doors, you are already overwhelmed. Today, the editor will explain their differences to you, so that you can choose the most suitable wooden door. The suitable one is the best!

(1) Original wooden door

Original wooden door refers to a wooden door made from selected natural imported wood. Its main feature is that the material of each component of the door leaf is the same tree species and consistent inside and outside. Generally All made of imported materials, no deformation, no cracking, no finger joints, no skin sticking.

For the combined structure of original wooden doors, the traditional structure is round tenon, which is generally used less now. The reasons include waste of raw materials, poor operation control, and high cost. Advantages: The through-and-through tenon combination is firm and conforms to the principle of mechanical offset.Easy to deform. Nowadays, some manufacturers use round bar mortise and tenon, or a combination of half mortise and half mortise to connect, which saves raw materials and is easy to process. Practice has proved that it is not as good as the transparent mortise and tenon structure invented by Luban, the originator of carpenters. The original wooden doors of ancient buildings are examples.

(2) Solid wood door

Not all solid wood doors are expensive, and they are divided into two types: \”finger joint board\” and \”log wood\”. The price of \”finger-jointed board\” solid wood doors is not much different from that of composite solid wood painted doors with solid wood veneer. The original wooden door is easy to understand and identify, and there are no traces of splicing small wooden boards together, but the price is relatively high.

(2) Composite door

The composite door consists of two parts: the \”base material layer\” and the \”finishing layer\”. The internal base material is fir board or multi-layer plywood, and the outer layer is a layer of density board. Since the base material is fir or multi-layer board made of fir, when merchants introduce composite doors, they will say \”this is a composite solid wood door\” very nicely. . Composite doors are also divided into many categories. The classification is based on the material type and process of the \”facing layer\” affixed to the outside of the base material layer. It is mainly divided into: those with ordinary plastic soft skin, melamine film, polymer board, Those with steel plates, those with painted skins, and those with solid wood skins made of baked paint or open paint.

① Ordinary plastic soft leather: the lowest cost, the market price is about 500 yuan/fan (the average market price, installation included, hardware not included, the same below). Defects: Since the plastic soft skin can be stretched, after being attached to the matte density board, granular bulges can be seen from the surface, which is of low grade. The manufacturing method of this kind of door is different from the \”absorption\” of the kitchen cabinet door panel. Plastic door panels\” are consistent.

②Polymer board: called \”polymer door\”, wood grain effectIf the simulation effect is not strong, it is a medium to low grade.

③ Those with steel plates: called \”steel-wood doors\”, the market price is basically the same as that of polymer doors.

④Melamine film: This kind of door is called a \”reinforced door\”. It is made of similar materials to the overall wardrobe and will not peel when soaked in water. The market price is about 900 yuan per door, and it is a mid-range door. When purchasing, pay attention to check whether the side edge strips of the door panels are thick and smooth (consistent with the method for identifying the production quality of the overall wardrobe panels). If the edge strips are thin and warped, it is produced by a small factory.

Those with painted skin and those with solid wood skin painted and open-painted are both called \”composite solid wood painted doors\”.

The several types of composite doors mentioned above are not painted, and the cost is definitely lower than that of painted doors. Painted composite doors can be divided into two types: \”sticker skin\” and \”wood skin\”. In terms of appearance, it is difficult to identify without comparing them together. You need to cut and tear off a small piece for inspection to find the difference. In terms of ex-factory cost, painted doors with veneer are nearly half cheaper than those with wood veneer. Those with real wood veneer are mainly composite paint doors with an open paint effect. The open paint is generally made of ash veneer, which has a relatively strong The concave and convex feeling of the wood grain is not achieved by sticker skin.

(3)Wood plastic door

In recent years, wood-plastic doors have become famous for their The special waterproof performance has also gained some market share, and its ex-factory cost is roughly equivalent to \”a composite painted door with sticker skin\”. The base material is made of wood powder and resin. The following introduces the material properties of wood plastic doors.

1. The product has the same processing properties as logs. It can be nailed, drilled, cut, bonded, and connected and fixed with nails or bolts. The surface is smooth and delicate, without sanding and painting. The paint has good adhesion , can also be painted according to personal preference.

2. The product has better physical properties than logs, better dimensional stability than wood, will not produce cracks, warping, no wood knots, twills, and is added with colorants, coatings or composite surfaces. Can be made into various products with brilliant colors, so no regular maintenance is required

3. Able to meet a variety of specifications, sizes, shapes, thicknesses, etc. This also includes providing finished products with a variety of designs, colors and wood grains, giving customers more choices.

4. The product has excellent properties such as fireproof, waterproof, corrosion-resistant, moisture-resistant, not insect-eaten, fungus-free, acid-resistant, non-toxic, non-polluting, etc., and has low maintenance costs.

5. The product has a wood-like appearance, is harder than ordinary plastic, has a long life, can be thermoformed, has high strength, and saves energy.

6. The product is strong, lightweight, thermally insulating, has a smooth surface, does not contain formaldehyde and other harmful substances, is non-toxic and non-polluting

Strongly recommend Jiangsu Melaleuca Wood Plastic Doors. Jiangsu Melaleuca Technology New Materials Co., Ltd. is located at No. 6, Keyan 2nd Road, Yizheng Development Zone, Yangzhou City, Jiangsu Province. The company covers an area of ​​about 100 acres and is a collective. Melaleuca is a modern technological enterprise that integrates the design, R&D, production, sales and application of wooden home products and technological new materials. It has a design team with 20 years of experience and a management team with experience in listed enterprise management.A group of tireless and constantly improving production teams. Since its establishment, the company has been adhering to the mission of \”people-oriented, sincerity and perfection, scientific and technological innovation, and leading the industry.\” We win the trust of users with sincere and thoughtful services. Welcome everyone to visit Jiangsu Melaleuca.

The above is what the editor brings us. What are the differences between original wood doors, solid wood doors, composite doors and wood plastic doors? Related content, if you have any questions related to wood plastic, please contact us