Once again, please note these 4 points when designing the shower room, the more you use it carefully, the more convenient it is.

In winter in the south, every time I take a bath, I go to the battlefield! The moment you open the water dragon is the most painful. I don’t know how cold the water is, so I can hide from it as far as I can. This kind of shower room that is separated is not separated and needs to be kept warm, and it is really painful! ! ! In order to find out that all toners can \”shower without hesitation\” on this winter day, I hope this shower room design will be not too late~

01

If you want to use the shower room well, you must have less layout.

1. One-line shape

The highest comfort level, the largest stretchable space, and is usually set at the bottom of the hygiene room. It can place a bathtub and is recommended for a garden with children or the elderly.

Design notes:

① Suitable for long-line or David.

② To meet the convenience and comfort of use, the depth should be no less than 120cm.

2. Square

Compared with one word The type is more square, with a higher utilization rate of space, and can be placed on the side of the bucket, bathroom cabinet, etc.

Design notes:

① Can be used in narrow areas or square health rooms.

② Common sizes: 80*100cm, 90*100cm.

3. Round arc type

The manufacturing price is relatively high, and the area occupied is smaller. Roundless without rims, higher safety.

Design notes:

① The sliding hardware must ensure quality, otherwise it will be easily dislodged.

② To ensure the normal activity of the person, the right angle length between the two sides is usually 85cm.

4. Walled stone shape

The most common choice for moisture separation is the highest utilization rate for space and can leave external area channels.

Design notes:

① Can be used in a more cramped and functional area that cannot be separated Large space.

② The length of the right angle between the two sides is recommended to be above 90cm.

02

The partition design has a direct connection with whether the shower room is independent.

1. Independent shower room

Independent shower rooms usually use glass doors as partitions, and the opening methods include push-pull and peaceful opening.

▲平開門

▲Push and pull door

Sealing: flat door>Pushing and pulling door

Convenience: flat door<Pushing and pulling Door

Saving space: open doors with flat opening <Push and pull doors

Easy to install: flat door>Pushing and pulling door

In addition, if the space is smaller or saves costs, If you want to realize the moisture separation, it is recommended to install a bath.

Installation:

① It is recommended to add a pendant at the bottom of the bath to prevent it from getting stuck. .

② The length must be about 2cm away from the ground and must be within the water strip.

③ Select stainless steel for the track, which is corrosion-resistant.

2. Semi-open style

HalfThe partitions of open shower rooms usually include: shower screen, glass tiles, half walls, etc.

Ⅰ Shower screen

No matter the size of the space, the shower screen is equally suitable, which can not only realize moisture separation, but also does not occupy space.

If there is a bathtub, you can consider combining the bathtub and the shower screen.

Ⅱ Glass tiles

Glass tiles have high thickness and opaque light transmission, which is very suitable for shower room partitions .

Measure the size in advance and determine the quantity of glass tiles. Special glass is required for installation of glass tiles.

Ⅲ Half wall

Use half walls to separate the wet areas, so that multiple people can ensure privacy when using it.

03

Shower room for heating, I believe this is the most concerned issue for the big guy.

1. Lighting warm

Almost all large boxes are used, that is, the heat rises quickly when it opens, but the heating range is small and the upper and lower is uneven, which is suitable for small spaces.

<img src=\"https://www.toutiao.com/a7030682592462635531/data:image/gif ;base64,R0lGODlhAQABAIAAAAAAAAAAAP///yH5BAEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA

① The shower area is humid, and all power supply wiring must be embedded in the wall in addition to waterproofing.

② The bulbs with warm lights are easy to get damaged, and it is recommended to have high safety explosion-proof lights.

2. Wind warm

It is safer than lighting heating, and can be used for ventilation, but it takes time to preheat, and it is more powered.

① Just like the lights and warm, do not install it open when you are safe.

② The installation location is not recommended directly above the shower area. , can be slightly offset.

3. Warm sheet

The first choice for most people is fast and evenly dispersed, with high comfort, and can also be used as an electric towel rack.

Installation:

① The steel heating plate has the highest price ratio.

② Considering the heating effect of heating, the installation position should be low rather than high.

③ It is necessary to deal with moisture-proof and anti-corrosion to avoid internal irrigation. Influencing the life of use.

4. Floor heating

Although floor heating is rarely seen in sanitary rooms, it is not impossible. It has high requirements for construction and is not easy to repair in the later stage, but it is really comfortable!

Installation advice:

① Floor heating suggestionsInstall in the dry area.

② Waterproofing must be done, especially at edges such as stone and floor drain.

③ The area of ​​the sanitation room is small, so the area of ​​the heat-producing area does not need to be too large.

04

You can often see something exploded in the shower room in the news, so Accessories are equally important!

The first thing I want to say is glass

1. Glass

Budget tightening → 3C mark steel glass + explosion-proof film. Sufficient budget → It is recommended to choose clamped hollow glass. The thickness is within 6mm~8mm. If it is a sliding door, it is recommended to lower the thickness to reduce the pressure on the slide.

2. Hardware

mainly include sliding wheels, chains, and joints. It is recommended to be stainless steel to effectively avoid corrosion. In terms of quality, it must be able to ensure smooth sliding, tight and low sound.

3. ​​Water strip

Also known as stone foundation, it is recommended to bury it before sticking the tiles, and it has the best waterproof effect. If the porcelain tiles are pasted and installed, the sealing will be obtained after a long time. Descend.

4. Gel

Prevent water leakage in the connection of the shower room, because the humidity temperature is prone to aging, it is recommended to two years. Change once.

You can choose a rubber strip with better shutdown, transparent and soft surface. The design of the shower room has come to an end here. If you still have any questions, please leave a message in the comment area below.

(PS: Some pictures are from the Internet. If there is any infringement, please contact us to delete it.)

Flying ink design|Flying ink design a lifestyle choice