Jiaxing Edell has obtained a low-voltage DC industrial door opening patent, which facilitates the opening and closing of the drive door

Finance Industry News on February 20, 2025, Information from the National Knowledge and Rights Bureau shows that Jiaxing Edel Electronic Technology Co., Ltd. has obtained a patent titled \”Low-voltage DC Industrial Door Opening Machine\”. Authorization Announcement No. CN 222501431 U, application date is May 2024.

The patent summary shows that this practical new model discloses a low-pressure DC industrial door opening machine, including a top shell, a DC motor fixedly connected to the inner side wall of the top shell, and a first belt wheel fixedly connected to the output end of the DC motor , the first dermal belt is connected to the second dermal belt through the transmission of the dermal belt, and the second dermal belt is fixedly connected to the outer side of the rotation axis. The two of the rotation axis are The sides are respectively connected to the inner side wall of the top shell through the rotation seat; the upper side of the transducer belt is fixedly connected to the first door through the first connecting block, and the lower side of the transducer belt is fixedly connected to the second door through the second connecting block; A sliding support mechanism that is slidingly cooperates with the first door and the second door is fixedly connected to the two sides of the top box. The practical new model is able to open and close the first door and the second door with the interaction of the DC motor, the first lever belt, the transmission lever belt, the second lever belt, the rotation shaft and the rotation seat, and the transmission efficiency is high.

Tianyan Check data shows that Jiaxing Edel Electronic Technology Co., Ltd., established in 2012, is located in Jiaxing City. It is an enterprise mainly engaged in computers, communications and other electronic equipment manufacturing industries. The enterprise registered capital is RMB 10 million, and the actual capital is RMB 1 million. Through Tianyan Check data analysis, Jiaxing Edel Electronic Technology Co., Ltd. participated in bidding and tendering projects three times, with 1 trademark information and 38 patent information in terms of intellectual property rights. In addition, the company also has 6 administrative licenses.

This article comes from the financial world

本站内容及图片来自网络,版权归原作者所有,内容仅供读者参考,不承担相关法律责任,如有侵犯请联系我们:609448834

(0)
华夏门网's avatar华夏门网
上一篇 2025年2月21日 09:30:46
下一篇 2025年2月21日 09:45:51

相关推荐

  • 简述工业门运行时的注意事项

    工业门现已是工业厂房必不可少的设施,在华夏门网工业滑升门的操作使用中,有哪些事项是需要特别注意的? 工业提升门是工业门的重要组成部分,主要安装在工业厂房、车间、仓库这类大型建筑的大尺寸洞口处,是专为工业企业的钢构厂房而特别设计的,其所有部件都是针对用户需要而特别特别生产设计的。比如工业提升门的门板,进口彩钢板内填充聚氨酯发泡,保温保温效果明显,对于高且内部空…

    工业门 2023年10月19日
    100
  • Intelligent heavy-duty road gate: leading industrial safety management into the new era-Jinan Technology

      With the continuous advancement of industrialization, safety management has become an important topic that major enterprises cannot ignore. Especially in some large industrial ve…

    工业门 2025年3月3日
    100
  • 简述工业门的门板所起到的作用

    工业门的门板由双层热镀锌钢板中间填充以六组份聚氨酯发泡涂层材料制成,具有良好的保温门封性能,能有效地保护门板不受恶劣气候环境的侵蚀,而华夏门网工业滑升门门板表面的各种纹路设计能最大程度地掩盖细小划痕和污物对门体表面的视觉影响。 一般大型工业门门板的接口在其背面,面板与背板咬合在一起,使其不会在使用的过程中刮伤墙面,同时工业门的面板与背板重叠四层,形成贯穿整块…

    工业门 2023年11月19日
    130
  • 工業遺產尋訪|長清城區僅存的一處工業遺產——長清鋼窗廠

    記者 郭學軍 一直以為,濟南市長清區城區內的工業遺產早已在城市更新中完全拆除。沒想到,在長清區清河街2546號,竟然還完好保存著一片不可多得的工業遺產——長清鋼窗廠。這裡,不僅老工廠大門還原樣保留,廠區裡面的紅磚車間廠房和老機器設備、老煙囪、老水塔,以及老辦公樓、老住宅樓、老平房宿舍等,都保持著充滿滄桑的歷史風貌,得以基本完整保留,實在彌足珍貴。 企業起源於…

    工业门 2024年12月9日
    40
  • 工业门安装过程中需要注意些什么?

    工业门是工业企业的必备设施之一,它的出现给工业用户们带来了极大的便利。工业门利用扭簧系统来保持门体沿着轨道进行平衡运行,性能稳定。在其安装过程中需要注意的事项也有很多,到底有哪些注意要点呢? 一、复核尺寸 安装工业门厂家华夏门网工业提升门时,对于门洞的尺寸以及两级的空间位置要再次进行复核,确保安装条件符合,工业门门体尺寸和洞口尺寸吻合。 二、检查导轨 导轨是…

    工业门 2024年6月8日
    70

联系我们

400-800-8888

在线咨询: QQ交谈

邮件:[email protected]

工作时间:周一至周五,9:30-18:30,节假日休息

关注微信