Must-see for installing! The secrets of unblocking the door are open.

Babys, if you want to change the door when decorating it, are you worried that the door will damage the wall? Don’t worry, today I will bring you a very detailed unblocked door strategy to the owner, allowing you to loosen the door easily, and also allow the old door to continue to shine and heat, and keep it tightly!

Preparation before demolition

1. Tool Preparation: Prepare screw knives, wrenches, crowbars, handshakes, utility knives and other tools to ensure that the tools are complete and intact, so as to avoid any damage to the tool or inappropriate during the removal process.
2. Safety Protection: Before dismantling, safety protection measures must be taken. Wear protective supplies such as safety helmets, protective gloves, protective lenses, etc. to prevent damage during the removal process.
3. On-site protection: Set warning signs around the demolition area to prevent unintentional personnel from entering. At the same time, use old bed sheets or papers to cover nearby utensils to avoid dust and contamination caused by dismantling.

Unsolutely unblocked door process

1. Cutting door frame and wall connection: Use a utility knife or a small cutting machine to cut lightly along the gap between the door frame and wall, and cut and fill the gap. and sealing gel. Please keep the blade or cutting piece flat when cutting to avoid damaging the door frame and wall.
2. Cleaning the filling: After the cutting is completed, use a screw knife or a small crowbar to gently pry the filling between the door frame and the wall. If the filling is harder, you can use a handshake to gently tap the crowbar to help loosen the filling. During the cleaning and irrigation process, please pay attentionAvoid damaging door frames and walls.
3. Relaxed wall: After the filling is cleaned to a certain level, use a crowbar or a kilogram to pry it from the bottom or side of the door frame , make the connection between the door frame and the wall loose. At the same time, you can use your hand to gently tap the door frame to help it remove the wall. During the process of loosening the wall, you should pay attention to the situation of the door frame and wall to avoid excessive force and causing damage.
4. Delete the door frame: When the connection between the door frame and the wall is completely loose, the door frame can be removed. If there are expansion bolts or connecting tabs to fix the door frame, you need to remove it first with a screw cutter or wrench. When removing the door frame, be careful to maintain the integrity of the door frame to avoid inappropriate force causing the door frame to be deformed or damaged.
5. Cleaning the site: After the demolition is completed, clean up the garbage and messes on the site in time. Clean and dry the old door frame and debris generated during the removal process to keep the site intact.

Treatment after removal

1. Check the door frame: The door frame after removal should be carefully inspected to see if there are any damage or deformation. If the frame is intact and unscathed, it can be cleaned and maintained for reuse.
2. Repair the wall: After removing the door frame, some holes and gaps may be left on the wall, which requires repair. You can use cement sand or filler for filling, and then grind it after drying to make the surface of the wall flat.
3. Installation of new doors: If you need to install a new door, you can do it after the wall repair is completed. According to the size and installation requirements of the new door, the door frame and door fan are installed to ensure that the door is secure and beautiful.

Baby children, it is not difficult to unpack the door without mercy, and they must follow the correct steps and methods.By operating the method, you can easily realize it. I hope this guide can help you, so that you can avoid walking in the process of decoration and successfully complete the door demolition task! # Unbreakable door #Decoration guide #Decoration skills