Pushing and pulling doors are the most powerful items that enhance the atmosphere!

The kitchen has it, which is instantly open and closed, which can be switched at will to meet the spiritual and life needs. ;

The bedroom has it, making it more convenient to enter and exit, and the space is much larger;

……

However, nowadays Actually, it is \”The sliding door is slowly withdrawing from the Chinese kitchen\”. Why does this abnormal phenomenon occur?

The root cause is that the \”4 shortcomings\” are too prominent!

①Glass is a fragile product.

If you are not careful, you will be in danger of breaking. , it will become a \”weapon\” in seconds when it breaks, which can injure people and kill people.

And the larger the surface, the greater the pressure it bears, the more likely it is to break.

To this end, we need to buy multi-layer steel surface prevention, which is very expensive and generally cannot afford it.

Naturally, unless you have money Otherwise, installing a glass sliding door will cause trouble for yourself and lay a nuisance for the safety of yourself and the people in it.

②The sealing is too poor

Can you have a gasket in the kitchen be careless?

Factory proves that the smoke rate of oil smokers is not 100%, and it is still susceptible to environmental pollution, which occurs in low pressure areas, causing oil smoke to spread and further increase the difficulty of daily cleaning.

It is obvious that the sealing properties of the sliding doors are not as good as traditional wooden doors + walls.

At the same time, there is a distance between the two doors, which is used to The sliding of the two doors causes poor sealing of the kitchen sliding doors and inability to separate noise and smoke problems in the kitchen.

/p>

③The floor is too difficult to clean

The floor is a common design for sliding doors.

It seems safe, but it will be left on the ground. The duct hides dirt and dirt, increases cleaning difficulties, and causes people to fall down. If the time is not complete, the door will not be closed and not tight…

The status of the hanging carriage and the ground carriage is similar, and it has always been the preferred choice for countless people.

However, when you really use it, you will find out\”It\’s not as perfect as I imagined\”!

The suspension car needs to be buried in advance, so that the tracks will not be left on the ground. Compared with the parking lot, it looks so perfect, but in fact At the beginning, this is a great test of the quality of hardware accessories and the skills of the teacher.

And because the hanger on the top supports two glass doors, it takes a long time and often slides, which will prevent failure or even accidentally slide down and hurt people.

In short, whether it is a ground or a hanging car, it faded out of the Chinese courtyard. But it\’s time to get a problem sooner or later.

It is recommended that you follow the Guangzhou People\’s School. This is popular now, and it is advanced and practical!

\”Give up the kitchen glass sliding door and change it into Pocket door! ! ”

Pack door is more ingenious in design than traditional sliding doors. It is not only valuable, but also has strong practicality. It comes from the source Solve safety hazards and hygiene problems.

How to install a \”pocket door\”?

⑴Choose the track

\”Pocket door can be completely hidden in the wall. Make the kitchen space more spacious and bright in view, and does not occupy any extra space when it is opened. ”

But in essence, it is just a hanging and a ground \”Upgraded version\” of the door! Therefore, large-scale manufacturers need to choose a more suitable method based on their daily switching frequency to ensure safety and durability.

Let the teacher calculate the length of the track first and make sure it is in advance When the track is taken to the scene, the card slot is reserved according to the track size, the track is buried in advance and installed horizontally to ensure that the door can slide vertically in the later stage, and the sealing property when the door is closed is not affected.

⑵Buy hardware by yourself

Hardware directly determines the pocket The door is safe and life-saving, so it is best for the owner to buy brand hardware with reliable quality in advance.

⑶ Separator structure

\”Pocket doors need to use specific separator structures to hide the door fan , ensure that the opening is convenient and the disadvantages of the sliding door are to be improved. ”

So, when designing, the master needs to consider the material and thickness of the partition to avoid being firm and safe.

Suggestions:

Installing a pocket door, Leave space according to the door width, if the door width is 75cm, leave 8.5~8.7cm, and then leave 10~12cm to install the reflector…

In addition, first fix an Oslo plate with a dovetail trowel on the inner side of the pocket, and leave two centimeters to avoid water problems.

Weld the steel stand in advance, and clean the gaps. Use anti-staining paint and silver powder paint to the welding or leakage-proof areas for anti-corrosion treatment. First brush the anti-staining, then brush the silver powder, 2 times each.

At the same time, a sufficiently large repair port should be reserved to facilitate early installation and later repairs.

General repair port size is 350*350 or 400*400.

…

⑷ Note the installation sequence

Remember, install the carriage first, and then install the door fan.

Finally process the wall surface, such as pasting paper, painting…

Written at the end,

Which type do you prefer, the sliding door and the pocket door? Welcome to discuss below to help more people quickly find the most suitable decoration, and less waste of flowers Money, don\’t walk the road!