For solid wood doors, everyone is When choosing it for home decoration, you value its many advantages: corrosion resistance, non-deformation, heat insulation, etc., so it has become the first choice for many people when purchasing doors. Therefore, quality is the primary consideration during the purchase process.

Solid wood doors are mainly made of logs, which are processed into wooden doors. There are many unscrupulous manufacturers who pass off defective goods for sale, so Zhuang Xiaobao will teach you how to identify their quality.

1. Tips for purchasing solid wood doors

1. Listen to the sound

If the sound you hear when you knock on a wooden door is Dull, then the quality of this wooden door is okay. The principle is that the higher the solid wood content in a wooden door, the heavier the door will be.

2. Look at the paint film

Observing the paint film is a step that cannot be ignored. First, you can observe it from a reflective angle, so that you can see it more accurately.

Secondly observe whether the flatness of the paint film on the surface is intact and whether there are any raised small particles and orange peel.

3. Patterns can also determine authenticity

Usually the pattern of solid wood doors is irregular. If the pattern of the solid wood door you choose is particularly neat and smooth, then it is recommended that you give up on it directly. If the solid wood door shows irregular patterns, you can safely carry it home.

4. TIPS for installing solid wood doors

The diagonal line of the door frame must be very accurate, and a difference of 1mm is allowed within 2 meters.

After the door is installed, it must be kept three-dimensionally horizontal and vertical, and differences in verticality are allowed. 2mm.

Attention should also be paid to the gap between the door frame and the door leaf. The lower seam should be 6mm, and the rest should be 2mm. The difference between all gaps is allowed to be 0.5mm.

When the door cover and the ground are combined, the gap must be less than 3mm, and finally the gap should be sealed with a waterproof sealant.

2. Tips for purchasing solid wood composite doors

1. Look at the surface

Qualified solid wood composite door panels need to have high flatness, clear wood grain, and no insect holes. Therefore, if the panel has knots, insect holes, and cracks, and the flatness is not high, the quality is unqualified.

2. Patterns can also determine authenticity

Composite doors are the same as solid wood doors, and the authenticity of solid wood can be identified by patterns

Real solid wood, the surface pattern is never smooth and neat, and the surface often shows Irregular pattern

3. Coordination must be achieved

The styles of wooden doors are almost the same, and there is no style at all. Then it is recommended to start with the color. When choosing a wooden door, you should make a decision based on the furniture and soft furnishings in the room, and try to be consistent with the furniture soft furnishings or the color of the windows. If you choose a white wooden door, the wall should be colored and contrast with the color of the wall.

4. Tips for installing composite doors

The installation stage of solid wood composite doors is generally in the later stage of decoration, after the putty on the wall has been scraped twice and the topcoat has been applied once.

When installing, the door panel and wall The gap between them needs to be sewn with foam glue. There needs to be a 5cm gap where the foam glue is applied to allow the foam glue to ventilate and solidify.

3. Tips for purchasing molded doors

1. Look at the sound insulation performance

The sound insulation performance determines the quality of the molded door, so if you want to choose a good quality and safe molded door, you must check whether its sound insulation performance is good.

2. Look at the quality of the inner frame

Observe whether there are horizontal keels at the installed hinges, whether the vertical keels and the horizontal arrangement of the inner frame meet the standards, and finally check whether the connection between the frame and the veneer is firm. If you see warped edges or cracks The quality is not up to par.

3. Look at the surface

Molded doors with dense materials and solid structures are certainly good. It is recommended that when purchasing, you first touch the lower panel, frame, etc. to see if there are any burrs. The paint surface of the door panel has uneven and wavy surfaces.To be eliminated.

4. Tips for installing molded doors

After the molded door is installed, you can knock on the side panel of the door and window cover. If you hear a hollow sound, you need to dismantle and redo it, because the hollow sound indicates that the bottom layer lacks the base plate, so the structure of the molded door is not strong. It\’s not safe to use either.

The three types of wooden doors introduced above are common wooden doors in the wooden door market today. Maybe when you enter the market, you will find more different names, but they are all inseparable from the above three types of foundations. As long as you rely on these three types of wooden door purchasing skills, I believe you can easily identify the wooden door you like.

More home information, exhibition information, sharing and interaction, decoration learning, and effect galleries are all on the Decoration Home Network.