The structure and practices of concealed doors, flat doors, and sliding doors, for detailed explanation and sharing

Practices and forms of doors and door sets (I)

There are many types of doors involved in the building project, and the doors are displayed on the doors. There are also many kinds of effects, craftsmanship, etc. According to the opening method of the door, the door can be divided into: flat door, free door, push and pull door, fold door, roll door, rotary door, automatic sensor door, etc. The functions of various doors are different due to the different space locations and properties, and the doors\’ sound and fire protection functions will also be different.

In the decoration project, indoor deepening designers should deepen the design of the door size, craftsmanship, hardware configuration, etc. based on the different functions of the door. I will explain some basic structures of the door. This chapter mainly involves the practices and forms of doors and door sets. The practices or sizes marked in the picture are not fixed or unchanged. They mainly express a basic structure and door set closing type. I hope that friends can get along with each other, and I also hope to express disagreement. .

1. Open the door in a flat manner

1. For ordinary flat doors, most doors and door sets in the decoration project will adopt this form, because the civil structure is in the After the body is completed, the method of plastering or paper is directly used to smear the plastering layer. This requires the door sleeve to cover the wooden base layer of the door sleeve. Generally, the door sleeve will protrude from the wall and close the mouth. (Of course there are many European-style lines that should protrude)

In the general analysis, we can see the door closure and the silo. Not any door needs to be set. Regarding the setting principles of door hardware, I have explained it in previous articles.

2. The door sleeves are flat with the wall surface. In public buildings (apartment) decoration, the wall surface usually has a dragon bone base layer. In this way, the door sleeves are flat with the wall surface.

/p>

3. Concealed door (the door, the door, the door cover and the wall are flat), the general door position will Close to the side of the door sleeve (open in accordance with the opening direction), this form can set the door close to the outer side of the door sleeve, so that the door, door sleeve, and wall surface are all flat. If all three are of the same material, It is completely possible to hide the door (it is to open the door inside). This type of door cover needs to be noted about the size of the black triangle in the picture (20mm). Generally, the size should not be less than 15mm to prevent the door tongue from opening at the door.Start the process plan to destroy the door.

/p>

2. Free door

Free door can be free in both directions When opened, the door cannot be set up, so the free door cannot be used as a fire door.

/p>

3. Push and pull door

Push and pull There are many door forms, and various forms of push and pull can be realized with different sliding forms. The number of push and pull door fans can also be set a lot. The following picture shows a hidden push and pull door method. Since it needs to be hidden, the wall will not use blocks. The body usually uses steel frames or light steel dragon bone frames.

/p>

Small tips

1. This article is only a common practice for wooden doors. Doors and door sets of different materials are the same as those of different types;

2. Since the door function will affect the hardware configuration, and the choice of door control hardware is closely related to the door\’s practice, art and material, various factors should be considered comprehensively when deepening the door.