Window size specifications and standards, good help for storage and lighting

Window size specifications and general window sizes are necessary to note; depending on the production materials, windows sold on the market can also be divided into multiple types, aluminum alloys , wood, iron, windows of all kinds of materials are available; however, no matter which material it is, you must pay attention to the window size specification when decorating the house and design according to the size of the general window The size of the window should be reasonable and appropriate, which can bring a better atmosphere to the room and ensure sufficient light source lighting. In fact, the standards of windows are not specified in this way. The architectural specifications have strict regulations on the size of windows. Next, I will bring a university to learn some knowledge about windows size.

Window size specifications

Window size specifications are actually based on the indoor height and interior surface Materials of windows And there is a difference. Among them, there are also differences due to the different materials, styles and opening methods of the windows.

Common window size

1. Window height:

Generally speaking, building in a house The height, ventilation, lighting, space, etc. have been properly designed before the process, so the height of the window has basically been determined, and it is very unrealistic to pass the later change. The height of windows also varies depending on the use venues. Usually, the height of windows in schools and other places is higher than that of residential and office buildings. Some windows have insufficient strength because protection measures are needed. However, for those who use glass curtains, they are calculated as the distance between the entire floor, so their height is generally greater than the height of ordinary windows.

2. Window width:

Some buildings have special designs due to styling requirements, so they use window structures. If this design is used , you need to pay special attention to the push and pull and sliding problems in the middle of each room. At the same time, we should also pay attention to the treatment of insufficient lighting and glare brought by this structure. This structure is usually not suitable for development of display work.

In general buildings, common window size specifications are 1.5×0.9 meters, and the window floors are available.The interface distance is 2.4 meters. If the window has a height of 0.8 meters, it must be reinforced. If you use a window, sound insulation and moisture-proof and dust-proof treatment are required. Otherwise, it will be poisoned by dampness, powder and other harmful gas substances.

Window size specification

In the window size specification, the window glass is specified Glagao= Glasses size – 7cm

Sash glass width = up and down dimension – 0.8cm

Bright window glass width = (up and down dimension – 7cm)/2 Bright window glass height = medium Column + 1.2cm

Three fans are long up and down (using four hooks?) = (up and down length – 10.5cm)/3

Three fans are long up and down (using four Support the entire enterprise? ) = (up and downward length – 12.6cm)/3

Four fans do not carry the middle seal = (up and downward length / 2-8cm)/2

Inner silhouette Height = gouguang length – 2cm Outer height = gouguang length + 0.5cm Medium seal size 3.2cm

Window size specifications, For window users of different materials and styles, the window size specifications are also different. For example, the basic window heights of aluminum alloy sliding door windows are 900, 1200, 1400, 1500, 1800, 2100mm; the basic window widths are 1200, 1500, 1800, 2100, 2400, 2700, and 3000mm.

The aluminum alloy flat door windows are specified in the window size specifications. The aluminum alloy windows have 40 series, 50 series and 70 series. The basic window hole heights are 600, 900, 1200, 1400, 1500, 1800, 2100mm; the basic windowThe hole widths are 600, 900, 1200, 1500, 1800, and 2100mm.

There are options for window glass specified in the window size specifications: ordinary flat glass, automobile specialty glass, float glass, cladding glass, steel glass, hollow glass, etc. The thickness of the glass is generally 5mm or 6mm.

The size of windows is different in many cases, so before making windows, you must measure the height of your house and what style windows you want to decorate, etc., and then select the interior decoration color. . A good window can not only illuminate the indoor space, but also enhance the large vision and protect vision.

Editor summary: Whether it is from architecture or art, it is a kind of conforming to aesthetics and architecture standards. The size selection of the general window must be reasonably selected according to the size, style and use of the home (for example, bedrooms, living rooms or bathrooms, etc.). Not every window account size specification will be applicable to every client type and every venue.

————————-

For more exciting decoration and layout content, please check the Qijie website (