Yunnan Industrial Investment Software Technology Development Co., Ltd. has obtained a manual button door lock patent, which can quickly open the isolation equipment seal door for easy replacement of testers or consumables.

Finance Industry reported on February 1, 2025 that the information of the State Intellectual Property Bureau showed that the Yunnan Industrial Investment Software Technology Development Co., Ltd. was awarded a company called \”a manual button door lock\”. Patent, Authorization Announcement No. CN 222414409 U, Application date is May 2024.

The patent summary shows that a manual button door lock includes button, tongue lock plate, tongue lock and door lock. The corresponding positions of the lock plate and door lock are respectively opened to fix mounting holes. The front side of the tongue is an inclined surface, and the middle part of the back side is connected to the square frame. The axle and axle are installed obliquely in the square frame. The lock tongue and the door lock are connected by a guide rod with springs. The front end of the button is a spherical head, and the back end is a square column. And an oblique port is formed at the end, and the oblique installation direction is consistent with the oblique installation direction of the roller. The center of the locking tongue plate is opened with a descent hole, and the center of the locking seat is opened with a circular hole, the descent hole, the center of the square frame and the circular hole are located in a Online, the button is installed through the sinker hole and fits the retrieval spring, and the oblique opening is clamped with the roller. Installing the door lock on the isolation device of the small detection device can quickly open the sealing door of the isolation device, allowing for quick change of testers or consumables for the testing device.

Tianyan Check data shows that Yunnan Industrial Investment Software Technology Development Co., Ltd. was established in 2000 and is located in Kunming City. It is an enterprise mainly engaged in software and information technology services. The company registered capital is RMB 19.7510.32 million. Through Tianyan Check data analysis, Yunnan Industrial Investment Software Technology Development Co., Ltd. has invested in 4 enterprises in a total of 5 foreign investment projects, participated in 2 trademark information in terms of intellectual property rights, and has 37 patent information. In addition, the company also has Administrative permits 11.

This article comes from the financial industry

本站内容及图片来自网络,版权归原作者所有,内容仅供读者参考,不承担相关法律责任,如有侵犯请联系我们:609448834

(0)
华夏门网的头像华夏门网
上一篇 2025年2月6日 11:37:59
下一篇 2025年2月6日 11:51:59

相关推荐

  • 快速门的安全性能怎么样?

    快速门的安全性能怎么样? 快速提升门就是一种升降速度很快的隔离门,它能够通过快速的升降来起到快速隔离的作用。具有快速、安全、可靠等特点,除可用于一般厂房外,还用于医药、食品、电子、洁净厂房,净化车间、卷烟、印刷、纺织、超市、轻工业厂房的区域隔离以及其它需快速出入的场所。 1.隔离效果好 快速门可以通过快速的升降来隔离车间内外部,从而对车间内的产品起到保护作用…

    快速门 2023年9月20日
    210
  • 浅谈快速门和高速门的区别

    快速门是指每秒运行速度超过0.6米的门,是快速升降的无障碍隔离门,主要功能是保温、保湿、防尘、防虫、隔音等,使车间保持恒温、恒湿、洁净的工作环境。适用于食品、医药、电子、橡胶、化工、汽车、纺织、物流等领域。 高速门是快速卷帘门和高速卷帘门的别称,高速门具有保温、保冷、防虫、防风、防尘、隔音、防火、防异味、采光等多项功能,适用于食品、化学、纺织、电子、超市、冷…

    快速门 2023年10月6日
    970
  • 工业快速门如何预防生锈或腐蚀?

    工业快速门   工业快速门如何预防生锈或腐蚀?   1、快速门下拉的适量长度的与地面相聚≤50mm。   2、快速门门体清洁和维护,定期进行门体清洁,禁止使用含有强酸强碱的清洁液。暴露的金属部位也需要注意。   3、建议每年对电机进行至少5次检查,及时养护加油保证其工作质量   4、快速门设备安装防火警报装置,门体末端设置活动拆式活动盖板,下端预留后期维修孔…

    快速门 2023年11月8日
    250
  • 硬质涡轮快速门的电机保护有哪些技巧?

    硬质涡轮快速门的电机保护有哪些技巧?    1、运用情况应常坚持干燥,电线接头外表、进风散热口应坚持洁净。   2、当电机的过热保护延续启动时,应查明原因,进行维护后方可投入运转。  3、应保持电机在运转过程中优越的润滑。普通的电机运转5000小时左右,即应增补或更换润滑油。更换润滑油时,应肃清旧的润滑油,洗净轴承及轴承盖的油槽。     4、当发现电机运转…

    快速门 2024年6月10日
    550
  • 电子车间无尘室适合安装的洁净快速门

    电子车间内部通常会有组装车间、表面贴装、焊接车间、过孔装配车间、印刷制造车间、成型与注塑车间、电子组件装配车间等等,这些车间都会根据零件的不同属性,规定不同的洁净等级以及温湿度,为了保持车间内部环境的稳定性,会在进出口安装快速卷帘门产品。 洁净快速门 这款洁净快速门是两侧采用是U型卡槽式高分子材料轨道,门帘与轨道采用拉链式咬合工艺衔接,在关门状态下,门的上下…

    快速门 2023年11月24日
    450

联系我们

400-800-8888

在线咨询: QQ交谈

邮件:[email protected]

工作时间:周一至周五,9:30-18:30,节假日休息

关注微信