What if the electricity volume of the phenomenon garage door is low?

What should happen if there is no electricity or low battery in the pistol garage door?

In modern life, with its convenient and practical characteristics, the turning garage door has become the ideal choice for many car owners. As an important part of the reserve power supply, as an important part of the phenomenon garage door, when the power supply is abnormal, it shoulders the heavy responsibility of ensuring the normal operation of the gallery door. Once the power supply is not power, a series of difficult problems will follow.

Reason Inquiry

Long-term idle and natural discharge

If the garage door is idle for a long time, the reserve power supply will stand for a long time, and the battery will inevitably occur naturally. Gradually decreased, which eventually caused the reserve power supply to be unable to power up normally at a critical moment, which brought great inconvenience to the owner. -track = \”12\”> Charging session failure

Charging system Once a failure occurs, the power replenishment of the reserve power supply will fall into trouble. It will also make the charging process abruptly stopped and cannot be completed. End of the battery life

Any battery has its own inherent service life. The use time is increasing, the chemical activity inside the battery has gradually decreased, and the battery capacity will gradually decrease. Demand. –TT-Darkmode-COLOR: #A2A2A2; \”> Excessive and Deep Discharge

If you frequently open and close the garage door, the reserve power will continue to discharge. Excessive discharge will cause difficulty reversing the battery, resulting in the rapid exhaustion of the power, and even if it is charged in the future, it is difficult to restore the battery performance as the beginning.

Fault presentation

Can\’t open and close normally

When the reserve power is out of power, The most intuitive failure is that the garage door cannot be opened or closed normally. With the lack of both municipal and reserve power, the garage door motor loses the source of power and cannot operate. It is difficult for owners to enter and exit the garage smoothly, which seriously affects daily travel and life order.

Control panel abnormalities

The control panel of the garage door usually has indicator lights for real-time display of the state of reserve power. When the reserve power supply is out of power, the indicator light often extinguishes, flickered, or displays an error code, so as to send a warning signal to the user anomaly.

Safety Protection Function Lisable

Some high-end turbopes are equipped with security protection functions such as obstacles rebound, and these functions are equipped with these functions Normal operation relying on stable power supply. Once the power supply is not power, these security protection functions may not work normally, which greatly increases the safety risks during the use of garage doors.

Solution

Check the charging system

Be sure to cut off the power to ensure the safety of the operation process. Use professional detection tools to measure the output voltage of the charger accurately to determine whether it meets the standard parameters. If the voltage is abnormal, replace the charger of the same specifications in time. At the same time, check the charging line carefully to see if there are problems such as damage, aging, and poor contact. Once you find it, you need to repair or replace the damaged lines in time.

Replace the battery

After it is determined that the battery aging problem causes the reserve power supply, you should purchase a new battery that is adapted to the door. Be sure to disconnect the connection between the battery and the system, and strictly pay attention to the connection order of positive and negative electrodes to ensure that the connection is firm and correct.

Establish a maintenance plan

formulate a scientific and reasonable regular maintenance system, conduct at least once a month\’s electricity disconnection test, use the reserve power supply to turn on and turn off The garage door is several times to comprehensively check its working status. The accumulation of dust and debris affects battery performance. STYLE = \”COLOR: #444444;-TT-Darkmode-COLOR: #A2A2A2;\”> Hold Manual Operation

/p>

When the power supply fails, it seems particularly critical to master the manual operation method. . First of all, the manual operation device near the motor must be found, which is generally pulling or the handle.Open or close. After the operation is completed, the manual device must be reset in time so that the garage door can quickly restore the automatic control function after the power is restored to normal.

The failure caused by the reserve power of the turbipular dealer door reserves cannot be ignored, but as long as we deeply understand the reasons, expression forms, and practical solutions behind it, we will conscientiously do daily maintenance and emergency preparations for emergency preparations. Work can effectively avoid the inconvenience caused by faults, ensure that the garage door is always in a good operating state, and provides a stable and reliable guarantee for our lives.

Solution

Check the charging system: First, cut off the power to ensure the safety of operation. Use a multimeter to measure the output voltage of the charger. Normally, it should be consistent with the output voltage of the charger. If the voltage is abnormal, it may be damaged by the charger. New chargers of the same model need to be replaced in time. At the same time, check the charging line carefully to check whether there are problems such as damage, aging, and virtual connection. For damaged lines, the insulation tape should be used to repair; if the line aging is serious or the circuit is disconnected, new wires need to be replaced.

Replace the battery: As a result, the reserve power supply is notAfter the electricity, buy a new battery that matches the garage door model. When replacing, first break the connection between the battery and the garage door system. Pay attention not to connect the positive and negative electrodes, and then install the new battery in place to ensure that the connection is firm. After the replacement is completed, the new battery is charged for the first time. The charging time can be referred to the battery manual. Generally, the first charging time is long to activate the battery performance and ensure that it can store the power normally.

Regular maintenance and charging: Formulate detailed detailed Maintenance plan, take at least once a month, conduct at least one -time tested testing, and use the reserve power supply to open and close the garage door 3-5 times to check the working state of the reserve power supply. In daily use, even if the municipal electricity is normal, it should be ensured that the charging system of the garage door should always be connected, so that the reserve power supply is in a floating charging state to avoid battery loss. At the same time, regularly clean the battery surface to prevent dust and debris from affecting the performance of the battery.

Manual operation: And when the municipal electricity is interrupted, the manual operating device of the garage door is found, usually located near the motor. It is a component with a ring or a handle. Pull up the pull ring or pull the handle to separate the motor from the transmission chain, and then drive the garage door to open or close through manpower. During the operation, pay attention to uniform strength to avoid damage to the garage door due to excessive force. After the operation is completed, the manual operation device must be reset to re -connect the motor to the transmission chain so that the garage door can be automatically controlled normally after the power is restored.