Precautions for the installation and use of fast anti -theft rolling door motor

The anti-theft rolling door is not only because his door is a anti-theft, but also has many configurations that use anti-theft devices, so naturally the energy efficiency of the motor is indispensable. We are installing the anti-theft rolling door motor motor. When we need to pay attention to what things can use our motor faster and faster, we can communicate with you today.

1. The rated improvement quality of the motor is designed under the standard rolls according to the rated output torque of the motor. It contains the quality of the door curtain, the quality of the roll, the resistance of the door body, and the resistance caused by the installation error. When choosing a anti -theft motor, please be sure to recommend the use of the motor at 70%of the rated of the motor.

Anti-theft rolling door

2. This roll door machine can be installed on the left or right side of the door. First, confirm whether the door machine is installed on the left side of the door or the right side. When installed on the right side, you can install it directly; if you install it on the left, first loosen the bolts connected to the motor and the motor, rotate the brake 180*, and then tighten the bolt, and then replace the button line and the yellow white line in the remote control line. If the door machine you buy is type B (chain transmission), the twist spring of the anti -broken chain device must be replaced with the left machine twist spring in the random attachment, and then the direction of the roller is adjusted to keep the roller upper upper. (Note: The so-called right-handed direction of the right hand when the right side is standing inside the door)

3. The iron pipe should be kept level. And flexible rotation. The installation of the iron pipe should keep a certain distance from the installation fixed board to avoid turning interference.

4. The motor shell must be reliable on the protection ground line, otherwise it may cause an electric shock accident.

5. Before testing the machine, you must check whether the wiring is correct and reliable.

6. During the operation of the door, there are strictly prohibited people,Drive.

7. Be sure to pay attention when using an electric switch. The rolling door switches from the top to a decline or a decline to the top. You must first press the stop button.

8. When the power outage or cannot be achieved, you can use the hand to pull the joint to open or close the door.

9. The motor is applicable to the short-term working system, and the continuous working time does not exceed 8 minutes.

10. Each door roll machine is equipped with 2 switches, which can be fixed or mobile.