Huatai Intelligent obtains a patent of comprehensive channel management and control device to improve the stability of the wing door component

The financial industry on January 15, 2025, the National Intellectual Property Office information shows that Huatai Intelligent Technology Co., Ltd. obtained a patent called \”Comprehensive Channel Management and Control Device\”, authorized U, the application date is July 2024.

Patent abstract shows that the new model involves a comprehensive channel management and control device, which belongs to the field of gateway technology, which solves the problem of decreased stability of the wing door after the long use of gates in the existing technology. The comprehensive channel management and control device Including the main body of the symmetrical settings, the gate wall of the gate is installed with wing door components by installing components, and the installation component rotates to drive the wing door component to realize the opening or shutdown of the channel. The installation components include the installation shaft and fixed in the installation shaft The clip parts on the upper holding parts have a stable component between the clamps. The stable component includes the fixed rod of the clamping part and the symmetrical sleeve set on the fixed rod. Increase the stability of the wing door component on the wing door components. In addition, the wing door components in this practical new type include a fixed board and a regulatory board. Passing of the channel.

Tianyan Check information shows that Huatai Intelligent Technology Co., Ltd., established in 2016, is located in Beijing. It is a company that is mainly engaged in science and technology promotion and application services. The company\’s registered capital of 10 million yuan and 100 million yuan in actual capital. Through the analysis of big data of Tianyan, Huatai Intelligent Technology Co., Ltd. has invested in 1 company, participating in bidding projects 10 times, 8 trademark information in intellectual property rights, 8 patent information, in addition to 17 administrative licenses.

This article comes from the financial industry

本站内容及图片来自网络,版权归原作者所有,内容仅供读者参考,不承担相关法律责任,如有侵犯请联系我们:609448834

(0)
华夏门网的头像华夏门网
上一篇 2025年1月25日 11:44:58
下一篇 2025年1月25日 11:48:03

相关推荐

  • 工业提升门开小窗的标准尺寸是多少?

    昆明海顿工业提升门上增开小窗的尺寸是多少? 昆明海顿工业门小窗尺寸为650*200。实际使用中,工业门开小窗的尺寸应根据具体情况进行选择和设计,以满足安全、通风和采光等需求。在设计工业门小窗时,有以下几个方面需要注意: 安全性能:小窗的设计应确保安全,避免造成人员伤害或物品掉落。考虑使用坚固的材料和合适的防护装置。 通风与采光:根据实际需求,确定小窗的大小和…

    提升门 2024年3月22日
    240
  • CADEAR|您好,您的「理想型」门窗已就位

    IDEAL SPACE 理想空间•自在而得 每个人都有自己所向往的生活方式与家居空间,一扇高品质的门窗享受理想家居生活的万千精彩…… 什么样的门窗,才是您的「理想型」? 只要中挺够窄,视野就够大,目之所及尽是日月星辰 CADEAR DOORS & WINDOWS 26mm超窄中挺设计,76mm行业内超窄提升门可视面,勾勒极简线条,打造纤细门扇,尽可能…

    提升门 2024年4月5日
    510
  • Kehuang\’s SES210 lifts the sliding door

    Keen\’s SES210 lifts the sliding door, with unique design and advanced lifting and pulling technology. This innovative design enables the opening of the door Close makes it e…

    提升门 2025年2月11日
    160
  • 改造扩建冷库车间进出口工业保温提升门

    以前的冷库,由于技术不成熟,厂房可能存在跑冷、有灰尘和蚊虫等问题,如今为了改善多种不足,开始在原基础上对冷库进行扩建和改造,尤其是在冷库出口,不再是以前单个的卷帘门,而是可以升级成更好的工业保温提升门,并且可搭配门封+装卸货平台配套组合使用,与以往相比更加的密封、隔离且保温。 冷库保温快速门 冷库出口采用提升门搭配门封+装卸货平台使用,可有效的避免内外冷热空…

    提升门 2023年12月1日
    940
  • industrial lift door

    Industrial lifting doors (also known as industrial sliding doors) use multi-block lifting, spring balance system, and motor drive. They have high strength, wind pressure resistance…

    提升门 2024年12月27日
    130

联系我们

400-800-8888

在线咨询: QQ交谈

邮件:[email protected]

工作时间:周一至周五,9:30-18:30,节假日休息

关注微信