Calculation method for the limit between the open-air motor and the door leaf of a sliding door

Calculation method for the limit between the open-air motor and the door leaf of a sliding door

I shared on the new media platform of Kunming Haydn Garage Door that the motor of the sliding door is installed on the ground. There is an adjustable limit space between the motor and the door panel. Then this distance How is it calculated? According to reports, the limit distance between the open-air motor of the sliding door and the door leaf is approximately 40mm.

The limiter of the open-air motor mainly consists of left and right limits, upper and lower limits, and buffer pads. The left and right limits are respectively the limit positions where the motor controls the pushing or pulling of the door leaf of the sliding door for translation work. This can be set by yourself according to the total length of the guide rail. However, the total length should not exceed the width of the door opening, and the excess length on the guide rail can be filled with cushion pads.

In order to prevent the open-air motor of the sliding door from leaking water and electricity, Kunming Haidun sliding door should be installed The power cord of the motor will be buried under the track, and the ground near the track will be waterproofed. When the sliding door needs to be opened, the movement between the outdoor motor and the door leaf is usually driven by a motor drive device. When the motor receives the switch signal, it will activate the switch to drive the door leaf to move horizontally along the track, thereby opening and closing the door.

During the movement of the door, the limiter will limit the movement range of the door leaf to prevent excessive or insufficient movement. Usually, the motor of the sliding door and the door leaf are connected through a transmission device such as a connecting rod or a chain to ensure synchronous movement between them.

The electric sliding door installed by Kunming Haidun Door Industry in the Songming Kunji Project has been highly affirmed and recognized by Party A. It is reported that these sliding doors not only have the advantages of high efficiency, resistance to strong winds, rebound when blocked, and convenient control of the flow of traffic and people in and out, but can also be connected with a variety of additional accessories, making them very suitable for the installation and use needs of industrial plants.

Moreover, the installation and operation of the outdoor motor are very quiet, which helps the sliding door run smoothly and can also create a quiet production environment. Moreover, this motor has a long service life and can efficiently meet the long-term use needs of industrial plants. In the event of an emergency, in addition to electric opening, the operating mode can also be manually pushed and pulled or a small escape door can be selected for evacuation, which is of great significance for creating a good safe production environment.