Decoration must not be easy, you must pay attention to details! If you just take it for granted and decorate, it will only be counterproductive in the end.

This is the conclusion I came to after visiting netizens’ car rollover scenes and combining it with my own experience.

I believe that everyone will feel the same after seeing these renovation and renovation sites, and can learn a lot of lessons from them.

Tiles are not aligned

Not sewing

Coupling seams

The wall tiles and floor tiles have no seams. Although it has no impact on living, the overall effect can be said to be better than the seams. It varies greatly.

Especially when looking at the magnification, the ceramic tiles with misaligned joints are obviously misaligned, and the longer the time passes, the more hollowing will occur.

The reason is, On the one hand, the master\’s craftsmanship is not up to standard and he is trying to save trouble; on the other hand, he does not supervise the work well.

@Suggestion

Before laying tiles, communicate with the master about the laying details,Try to refine the process as much as possible, even if you spend a little more money, it must be done properly, so as not to have no effect in the future and make yourself uncomfortable.

In addition, Be sure to be there to supervise the work when laying the tiles! Ask the master to paste the tiles according to the design drawings drawn by the tile shop, and do not cut the tiles casually to avoid unnecessary losses

The floor closing is not meticulous

If there is a gap between the tiles and the floor, it must be closed. The more popular method now is to use extremely narrow edge strips, which has good results. , simple and beautiful.

But this kind of minimalist edge closing is a delicate job. Most masters do not do it carefully and the edge is not smooth at all, which looks ugly.

@Suggestion

Extremely narrow edge strips can be purchased online, as long as the size is suitable and the material and color are harmonious The floor is uniform and the effect will not be too bad after laying.

You still need to keep an eye on the workmanship.Some masters are afraid of trouble and will say that minimalist closure cannot be done . Don\’t listen to him. If you can\’t, just find a master who can do it. The details are right and the effect is great.

The height of the socket is wrong

The height of the socket is not correct, and there is an embarrassing situation that it cannot be used…

In fact, most people also make this mistake, Only focus on the number of sockets, but ignore details such as height and size.

@Recommendation

During the renovation of water and electricity, go to the site in person and draw the location and height of the socket on the wall to experience it. If it is not suitable, adjust it in time. Select furniture and appliances according to the height of the socket to avoid the above incidents.

Conversion socket

Universal Magic Socket

If the decoration has been completed and the position cannot be adjusted, it is recommended to replace the socket with an inclined five-hole one, or Thin conversion socket, can improve the convenience of use.

Customized wardrobe edge sealing is inconsistent

The edge sealing of the cabinet is not in place, and the edges will explode after being used for a long time

The top cabinet sealing plate is inconsistent with the cabinet body color, which is ugly;

The quality of the hardware is not up to standard, not even half of it is out. The moon cabinet door fell off…

@Suggestion

Appeared The root of these problems lies in ignoring the detailsTherefore, when customizing a wardrobe, you must communicate the details with the designer:

①The color of the cabinet sealing plate should be consistent with the cabinet; including the sides as much as possible Decorating with boards and directly exposing the box also has an impact. Sound and aesthetics

③The board must be edge-sealed! !!

It is not only for durability and beauty, but also can effectively prevent the release of formaldehyde from the board. The edge sealing is sufficient. If you don’t waste the money, choose laser edge sealing, which will give better results.

The bathroom floor drain is installed incorrectly

Long strip floor drains have been very popular in recent years, and many people have followed suit, but the result has been a disaster… No If the design is not in place, there will be problems when using it.

First of all, let’s clarify that the long strip floor drain has only one outlet, just like the ordinary floor drain. It only increases the drainage area, giving the illusion of faster drainage.

There are many corners, which hide dirt

In fact, when used, it is no different from ordinary floor drains. Moreover, Strip floor drains have more dead ends than traditional floor drains and are more difficult to clean.

@Recommendation:

If you want a long floor drain, when doing water and electricity, you must plan the location of the water, the size of the floor drain, Tile size, laying method, etc. Don’t wait until the floor drain is finally installed to discover the problem.

Of course, I still recommend making a traditional floor drain with a good drainage outlet and slope.You don’t have to worry about clogging and slow draining, and it’s easy to clean in the future. (Note: There must be floor drains in wet and dry areas)

Refrigerator \”fake embedded\”

Put an ordinary refrigerator into a custom cabinet. Is this what your refrigerator looks like? If so, congratulations on making a“fake embedded” refrigerator.

Such a fake built-in refrigerator has a large protrusion on the outside, which affects the aesthetics; there are heat dissipation gaps on the four sides, which can easily trap dirt and evil, and its practicality is very low.

What is a real built-in refrigerator? After the refrigerator is built-in, it forms a flat surface with the cabinet, which fits perfectly without bulges and saves space;

The heat dissipation vent is on the top or bottom side, which actively exhausts air and does not affect the operation; cabinet doors can be installed on the outside, so that The integrity of the cabinet is stronger.

@Suggestion:

To be honest,most built-in refrigerators on the market do not Correct. It\’s just a pretense used by businesses to cater to public needs.

If you want to hide an ordinary refrigerator completely in a cabinet, you need to dismantle the wall in advance and make grooves, or make the thickness of the cabinet the same as the refrigerator, otherwise There will be bulges.

What’s more, even if you do this, you can’t make the refrigerator and the cabinet fit perfectly, and it will be difficult to clean it later.

So, if the embedding conditions are not met, don’t blindly do embedding refrigerator.

You can also put the refrigerator next to the cabinet, but it is best to make it so that one side is close to the other and the other side is left empty. It not only looks good, but is also convenient to use and does not affect heat dissipation. .

Conclusion:

Decoration is a technical job, and it also tests patience and carefulness. Don’t be afraid of trouble, and do it if you can do it well. To the extreme, this will make your home more comfortable!

(The picture comes from the Internet, if there is any infringement, it will be deleted immediately)