The bedside table blocks the wardrobe door, 5 ways to solve it

There was a special topic on this problem before. Today I will talk about various solutions in detail. You can learn from it when applying it in practice.

The first method: the simplest way to disconnect the cabinet door.

▲If the customized wardrobe as shown in the picture is a finished bedside table, the innermost part where it overlaps with the bedside table is disconnected, so that it will not conflict with the bedside table during normal use.

▲The first method is to connect the disconnected small cabinet door to the right side, so that the space here can be used; the second method is to eliminate the upper partition and put the clothes hanging above directly into the dead space for utilization

▲SecondThe first way is to open up the space between the lower disconnect position and the upper part, so that the hanging clothes can be put down and the dead space below can be rationally used

▲If you place a finished desk or dressing table, you can also use a disconnected design, but it is not recommended to place the finished desk close to the wardrobe. It is more suitable to customize it directly, and the color is more uniform

Note:No matter how you do it, The space here cannot be wasted. Secondly, don’t just pay attention to the height of the bedside table, but also pay attention to the width of the cabinet door, which must be larger than the finished bedside table. Otherwise, the back bedside table is deeper than one cabinet door and will block the opening of the second cabinet door

Second, the alcove replaces the bedside table.

For a small space, it not only realizes the function of a bedside table, but also saves a bedside table. \”No need for a bedside table, make an alcove to store more\”

▲As shown in the picture, a hollow niche is made directly at the first disconnected position, which also meets the function of a bedside table and avoids the problem of conflict between the finished bedside table and the cabinet door.

▲As shown in the picture, the platform bed is designed with a niche under the wardrobe, which can accommodate the storage of bedside tables and avoid conflicts with the cabinet doors

▲Remove one cabinet door and create an overall hollow niche design to avoid conflict between the cabinet door and the bedside table, while taking into account storage and book storage

▲ Partially hollowed out to extend the customized bedside table to solve the conflict with the cabinet door. And added storage space on the bedside table

▲The hollow niche extends the storage of a bedside table to avoid conflict with the cabinet door and increase the storage area of ​​the bedside countertop

▲The hollow niche extends a custom bedside table to expand more storage space and avoid conflicts between the finished bedside table and the cabinet door

▲The bottom of the wardrobe is partially hollowed out to make L-shaped drawer storage, and the niche can accommodate more convenient storage

▲As shown in the picture, the entire niche is suspended as a drawer, which not only avoids the deformation problem of one door to the top, but also makes the vision more flexible, and creates a better atmosphere with lighting

▲No bedside table is needed. One door is hollowed out for display or classified storage, which also meets the function of a bedside table

▲It is directly made into an alcove, with a row of drawers underneath for classified storage. The alcove can serve as a bedside table for convenient storage.

▲You can also extend the function of a bedside table in the niche below

Third: Suspended drawer bedside table

▲A bedside table drawer extends under the wardrobe to meet the function of a bedside table.At the same time, avoid conflicts between the finished bedside table and the cabinet door

▲As shown in the picture, the niche + suspended drawer meet the function of a bedside table. At the same time, there is a hidden drawer below to avoid conflict with the cabinet door

▲The bottom of the wardrobe is made of drawers instead of bedside tables, which can meet the needs of classified storage and at the same time open the drawers to function as a bedside table

▲An extended suspended drawer satisfies the function and avoids conflict with the cabinet door

▲As shown in the picture, a fixed drawer is extended, and the upper wardrobe is partially hollowed out to serve as a layout for displays or books

▲ Extended in the air as shown in the picture A drawer bedside table satisfies the function and avoids conflict with the cabinet door

▲You can also customize suspended drawers symmetrically on both sides to meet the functions of bedside tables on both sides

▲Lighting can also be used under the suspended bedside table to increase the atmosphere of the bedroom

▲You can also extend a bedside table in the air and use drawer storage horizontally, which not only avoids the conflict between the finished bedside table and the cabinet door, but also avoids the problem of deformation of the cabinet door from door to top

Fourth, hidden bedside table

▲ Instead of a bedside table, make a hidden drawer that can be pulled out when in use and hidden when not in use. It will look better

▲Same principle, use rails or pulleys to make a hidden bedside table, pull it out when in use, and hide it when not in use

▲You can also use the method of drawers within drawers. As shown in the picture, it is a bedside table with two small drawers on the side. Drawers can be used for storage

▲You can also make three drawers directly without a bedside table. The ultra-thin drawer at the top can be pulled out and used as a bedside table to store items.

▲It can also be combined with a niche and a drawer. It can be stored in categories and the niche can meet the needs of convenient storage

▲You can also have two drawers + a niche. The niche can be used for convenient storage, and the two drawers can be used for hidden storage

▲The hidden bedside table as shown in the picture , which not only avoids the conflict between the cabinet door and the finished bedside table, but also hides it to make the space more concise

Fifth , Customized desk/dressing table instead of bedside table

This is the most recommended method because it can extend more functions and take into account Storage at home \”No need for bedside tables, use wardrobes to extend functions\”

▲As shown in the picture, the bedside table is removed and a desk is used as a dressing table to fulfill the function of a bedside table.At the same time, more storage is taken into account; the upper niche avoids conflicts between cabinet doors and desk items, while satisfying the layout of a small number of books

▲As shown in the picture, a desk is extended and customized, and one door of the wardrobe is hollowed out to be used as a bookshelf to store, satisfying a study and office area

▲As shown in the picture, if you need to store more books with the hollow above, you can also expand the range, so that more books can be stored

▲As shown in the picture, the desk is extended to serve as a dressing table. The hollow position above should be based on your own needs and overall design plan. At least one space needs to be hollowed out to prevent the upper cabinet door from conflicting with items on the desk

Original album catalog, constantly updated 12.29