Anhui Feile obtained the patent for quick-detachable screen door to facilitate the disassembly of the door body

According to news from the financial industry on January 9, 2025, information from the State Intellectual Property Office shows that Anhui Feile Automatic Door Manufacturing Co., Ltd. has obtained a patent called \”a quick-detachable screen door\”. Authorization announcement number CN 222291711 U, application date is May 2024.

The patent abstract shows that the utility model provides a quick-detachable screen door, which includes: a shielding wall with a door hole; a guide assembly installed on one side of the shielding wall and located in the door hole below; the number of moving blocks is two. The two moving blocks are symmetrically and slidably installed on the guide assembly. The utility model is provided with a snap-in mechanism. When the door body is assembled on the moving block, the door body and the moving block can be snap-connected through the snap-in mechanism, so that the door body and the moving block can be fixed and the door body can be disassembled. When, cancel the clamping between the door body and the moving block by the clamping mechanism, The door body can be disassembled instead of the fixed installation method between the door body and the moving block through multiple screws. When disassembling the door body, there is no need to use a screwdriver to disassemble multiple screws in sequence, thus facilitating the disassembly of the door body and lowering the door body. reduce the difficulty of disassembly and improve disassembly efficiency.

Tianyancha data shows that Anhui Feile Automatic Door Manufacturing Co., Ltd. was established in 2016 and is located in Chuzhou City. It is an enterprise mainly engaged in general equipment manufacturing. The registered capital of the company is 50 million yuan. Through Tianyancha big data analysis, Anhui Feile Automatic Door Manufacturing Co., Ltd. has participated in bidding projects 3 times. In terms of intellectual property rights, it has 1 trademark information and 62 patent information. In addition, the company also has 17 administrative licenses.

This article comes from the financial world

本站内容及图片来自网络,版权归原作者所有,内容仅供读者参考,不承担相关法律责任,如有侵犯请联系我们:609448834

(0)
华夏门网's avatar华夏门网
上一篇 2025年1月9日 10:39:38
下一篇 2025年1月9日 10:43:07

相关推荐

  • 压缩机制造数字化车间用的pvc快速门

    压缩机是一种将低压气体提升为高压气体的从动的流体机械,是制冷系统的心脏。压缩机生产流程多且加工工艺复杂,现在很多企业实现了更加智能的生产。因此配备压缩机车间的用门可以选智能化的pvc快速门,更提高效率。 压缩机制造车间用的pvc快速门 压缩机加工程序工艺比较多,包括冲压、焊接等。快速卷帘门防污染,压缩机在设计时,制冷与空调领域中CFCS和HCFCS对大气臭氧…

    快速门 2023年10月11日
    120
  • 快速卷帘门:高效便捷的进出体验。

    随着科技的不断进步和人们生活节奏的加快,快速卷帘门已经成为现代生产和生活的必需品。它作为一种高效、便捷的出入门户,在各个领域都得到了广泛应用。 本文将对快速卷帘门进行介绍,让读者了解其定义、分类、优点和应用场景: 定义: 快速卷帘门又称快速门、快速卷门、高速卷帘门等,是一种采用新型材料和动力系统制作的门。它具有快速开关、高效隔热、防尘、防虫、隔音等功能,可满…

    快速门 2023年9月18日
    2400
  • 宁波安晟门业公司的努力促进工业门行业发展

    本网讯( 特约记者 周光辉 文/摄 ) 宁波安晟门业科技有限公司近期获得聘任,正式成为全国行业协会团体标准参编单位。这是对宁波安晟门业多年来致力于快速门、工业用门行业的努力和成绩之肯定。作为江浙沪皖工业门标杆性老牌领军企业之一,宁波安晟门业在工业门快速门行业中具有强大竞争力和技术领先优势—— 更加值得一提的是:宁波安晟门业科技有限公司几个月前还在数百家招投标…

    快速门 2023年10月18日
    670
  • 硬质涡轮快速门的电机保护有哪些技巧?

    硬质涡轮快速门的电机保护有哪些技巧?    1、运用情况应常坚持干燥,电线接头外表、进风散热口应坚持洁净。   2、当电机的过热保护延续启动时,应查明原因,进行维护后方可投入运转。  3、应保持电机在运转过程中优越的润滑。普通的电机运转5000小时左右,即应增补或更换润滑油。更换润滑油时,应肃清旧的润滑油,洗净轴承及轴承盖的油槽。     4、当发现电机运转…

    快速门 2024年6月10日
    480
  • 快速提升门和快速卷帘门的区别是什么

      1、快速卷帘门是将多骨关节门片串连在一块,以门上边卷帘窗帘为核心运转的前后的门,由帘板、直线导轨、橡胶支座、秘药、卷卷帘门电机、手动式速放宽关设备、旋钮开关和安全装置等13个部分构成;工业提升门是由多方面门框构成,沿导轨升高的门,由前后直线导轨、由前后驱动轮、主柱、平行四边合页组织 、PVC帘面、铝密封条、门拉手等零部件构成。   2、快速卷帘门只是应用…

    快速门 2023年10月26日
    70

联系我们

400-800-8888

在线咨询: QQ交谈

邮件:[email protected]

工作时间:周一至周五,9:30-18:30,节假日休息

关注微信