Detailed analysis of hospital door structure

1. Door panel covering resin fireproof antibacterial board

1. The surface material is heat-cured high-density resin material, non-toxic, environmentally friendly, formaldehyde-free, Benzene (can be used as spectacle lenses, tableware, etc.);

2. Strong wear resistance (hardness up to 6500 rpm);

3. BIO minerals are antibacterial;

4. Acid-resistant;

5. Fireproof (fireproof level reaches Level 2);

6. Anti-ultraviolet, no discoloration;

7. Anti-static;

8. Bright and rich colors (more than 60 kinds);

2. Door edges are hardened. Door edges and corners are extremely fragile parts. Aluminum alloy edge reinforced steel. Compared with the traditional edge sealing method, it has higher strength, does not absorb moisture, deform and crack, and is more beautiful and durable.

3. According to the requirements of the hospital, we can also install stainless steel anti-collision belts on vulnerable parts. Compared with colloidal anti-collision tape, it does not age, discolor, warp, or fall off, and is durable.

4. The internal structure of the door is made of high-density composite board plus grid filler, which is stronger than the traditional honeycomb structure and is moisture-proof, deformable and hollow.

5. The door cover is decorated with flame-retardant and antibacterial resin boards, and the interior is a combination of horizontal and vertical fast-growing poplar wood, which is moisture-proof, anti-cracking, and anti-deformation (the upper and lower sides of the door) are covered with lids. Waxed during assembly to prevent moisture and cracking).

6. The door stop line of the door cover and door panel is protected by aluminum alloy to prevent bumps and scratches after the work vehicle collides.

7. Perspective window glass on the door: all made of 5mm tempered glass.

8. The child’s mother door and side door are both made of opposing strips and soundproof strips to encourage patients to rest and keep the room quiet.