Is it better to use aluminum alloy or broken bridge aluminum to seal the balcony? After the master compared it, he realized that he had made the wrong choice.

Nowadays, many people are willing to buy higher and higher houses. Therefore, in order to prevent any safety accidents, balconies must be sealed.

And sealing the balcony can also increase our indoor use area, and it will be much better in terms of heat preservation, heat insulation, waterproofing, dustproof and noise prevention.

Then the question is, what material should we choose to seal the balcony at home? After the master made a comparison, he realized that most people had made the wrong choice.

Nowadays, most families use broken bridge aluminum and aluminum alloys to choose materials for sealing balconies.

Of course, there are also some frameless windows or plastic steel windows where these materials are not often used.

Because its general life is not long and there are many shortcomings, today we focus on aluminum alloy and broken bridge aluminum.

1. Aluminum alloy doors and windows

This is the most commonly used material for the decoration of doors and windows in our traditional homes. The material quality is good, the profile is integrated, and the main frames on both sides and the connector in the middle are all aluminum alloy.

Therefore, aluminum alloy materials have a faster heat transfer rate than other materials and have poor heat insulation effects.

Aluminum alloy doors and windows have better sealing and are strong and durable.The overall texture is lighter and not too heavy.

Furthermore, aluminum alloy materials are also extremely affordable in terms of price. The ordinary price is only tens to hundreds per square meter, while the better ones will not exceed 300 yuan per square meter.

At the same time, aluminum alloy is a metal material and is very good in terms of anti-aging, anti-oxidation and anti-corrosion.The service life is generally About 20 years.

2. Broken bridge aluminum doors and windows

Broken bridge aluminum doors and windows are actually the same material. There is no difference, just in the profile, the broken bridge aluminum should be in two parts.

It is not a whole like aluminum alloy. It is cut from the aluminum alloy and then connected together with materials with low heat conduction coefficient.

Commonly used connecting materials are plastic and nylon insulation strips. It is precisely because of this layer of insulation material that broken bridge aluminum far surpasses aluminum alloy in terms of heat insulation.

And, in addition to heat insulation, in terms of sound insulation, waterproof, heat preservation and wind and sand prevention, there is an additional broken bridge treated with heat insulation strips Aluminum is also much better than aluminum alloy.

As far as price is concerned, because it has stronger functionality, it is also expensive. Generally speaking,The price range is 300-800 per square meter, and the ones with better quality may cost thousands.

In terms of quality and lifespan, broken bridge aluminum doors and windows are also made of aluminum alloy, with an insulation tape added in the middle.Therefore, in terms of quality It will be better than aluminum alloy in terms of product and life span, and at the same time, it will have more and better-looking styles.

After understanding the characteristics of these two materials, let’s take a look at how to distinguish the two. After all, the materials are the same and the appearance is almost the same. Can\’t tell.

Looking at the cross-section, the cross-section of the profile is the easiest to distinguish between the two materials, because one has damping and insulation strips, and the other does not.

Looking at the size, the broken aluminum bridge profile is thicker than the ordinary aluminum alloy profile and feels thicker

Look at the window sash. If it is a broken aluminum bridge profile, there will be a black top strip on the side of the window, which is the damping strip.

In general, the essential difference between aluminum alloy and broken aluminum bridge is to see whether the bridge breaking process has been done and whether damping and heat insulation have been added. Many businesses now use aluminum alloys to fill and break aluminum bridges. , everyone must pay attention to the distinction.

Secondly, Sister Fun personally recommends that if the budget is enough, it is better to choose broken aluminum bridge profiles.

If the picture is infringing, delete it

If you want to know more exciting content, please follow @FUN sister life home