Frameless doors are popular all over the Internet. Should we follow the trend?

In previous decorations, the door leaf and the door cover were a pair of \”destined partners\”. Whenever a door is installed, the door cover must be included. Nowadays, many owners abandon door frames and pursue frameless doors in pursuit of ultimate simplicity. It can be applied to frameless doors in minimalist, light luxury, simple European, modern and other styles. Due to its high appearance, it has gradually become a new fashion in home decoration.

What is a door cover?

The door frame is a frame installed on the left and right sides and top of the door opening. It consists of the door frame, sealing strip, door stopper and door frame line.

What is the use of door covers?

1 Protect the wall. During the installation of indoor doors or in the process of living at home, it is inevitable that they will get stained, scratched, and bumped. The function of the door cover can make good use of the characteristics of different door cover materials to protect the wall and allow the indoor door to be better installed on the wall.

2 Helps the wall material to close. No matter what kind of wall material is used, the problem of closing the wall cannot be avoided. Once the closing is done, the wall material can better fit the wall and function better. The installation of the door cover can allow different wall materials to be well pressed, reinforced and closed during the intersection process.

3 Beautify the space. Door covers can be matched with different materials, colors, and shapes according to different decoration styles to better integrate with interior doors and play a very good decorative role. For example, Nordic style, modern style, light luxury style, etc., it can be customized according to different styles.Style, match different colors, materials, and sizes to use interior doors to better integrate into the space and beautify the space.

4. Correct uneven walls. The wall looks flat to the naked eye, but it \”reveals its original shape\” when the light shines on it. The wall is not leveled, and the door leaves are installed directly, and there are gaps all around. The door cover is very tolerant of the wall, and some slight errors can be corrected, allowing the door leaf to open and close normally, and also avoiding the problem of air, light and sound leakage.

So, can frameless doors be made?

Since door frames are so useful, can minimalist frameless doors still be used?

Yes, of course it can be done, but the cost and craftsmanship requirements of frameless doors are relatively higher. Frameless doors do not have no door frame, but are hidden. The door leaf looks flush with the wall on the outside, but it is actually achieved by the door frame being pre-set in the wall and then being flush with the wall. So, how to make frameless doors? To this end, Xiaodi has summarized a few points for you. Be sure to take a small notebook and write it down!

1. The wall must be leveled

If the wall is uneven, especially the dumb opening, if you want to install frameless doors later, you will definitely be overturned! It can range from being crooked and showing seams, to being unable to close the door. Before installing the door, it is best to make the wall vertical and horizontal, and it is best to check it in person with a ruler or laser ruler.

2. The slot width of the door frame should be sufficient

The slot width of the door frame should preferably be greater than 5cm, because If the door is opened and closed frequently, it will shake slightly. If the slot is too small, there is a risk of cracking at the intersection between the door frame and the wall.

3. The wall is patched and closed perfectly. After the frameless door is installed, the wall needs to be patched and dry. Applying artistic paint to the entire wall will give you a better overall effect.

The above is the little knowledge Xiaodi shared with you this time about door covers and frameless doors. Follow Xiaodi to learn more about doorways and buy.