What are the general dimensions of wardrobe doors (what is the national standard for wardrobe door gaps)

Hello everyone, I am Chengdu Whole House Customization Awei. The wardrobe is not only an important storage tool in home life, but in the eyes of modern people, the wardrobe is also an important tool for decorating the room. The beauty and practicality of the wardrobe are equally important, especially the design of the wardrobe door, and the size must be grasped. So, what is the typical size of a wardrobe door? What is the national standard for wardrobe door gaps? Let’s analyze them one by one for you.

1. What are the general dimensions of wardrobe doors

1. Sliding wardrobe doors. This kind of wardrobe door slides one of the doors directly to the left or right. It needs to be overlapped during use. Therefore, the size of the wardrobe sliding door will be slightly larger than the size of the wardrobe frame, about 60cm-80cm, the maximum No more than 90cm, otherwise it will be difficult to open and conflict with other designs. The size of the sliding door is related to the thickness of the plate. When choosing a sliding door, try to choose a plate with a thickness of 10mm-12mm. This kind of plate is more stable and durable.

　2. Swing door wardrobe. The swing door is a traditional wardrobe door. The way to open the door is to pull the door leaf directly through the door handle. Its width is about 45cm-60cm, which can ensure the beauty and practicality of the wardrobe door.

　2. What is the national standard for wardrobe door gaps

1. National regulations state that the door gap of wardrobe doors should be between 1 mm and 2 mm, and it is best not to exceed 2 mm. mm, no matter what type of cabinet door it is, this distance is the same. Moreover, the width between the cabinet door gaps should not exceed 3 mm. Once it exceeds, it is an unqualified product.

2. The state stipulates such installation standards for door gaps. That is because the door gap is too large, the sealing is not good, it is easy to accumulate dust, and it is not beautiful; the door gap is too small. ,It cannot open and close normally, and it is easy to damage the cabinet door. If the door gap is too large, the installation master will adjust the screws on the hinge according to the actual situation, so that the door gap can be reduced.

　Three. How should the wardrobe door be designed?

　1. Sliding door design, sliding left and right, takes up less space, has many styles, and has a relatively high overall appearance. However, the size should not be too wide. If necessary, three sliding doors can be designed.

2. The folding door design is folded one by one during use and relies on slide rails for operation, which has less impact on the space and has a more advanced appearance.

3. The open design is to cancel the design of the wardrobe door. The overall effect is beautiful and fashionable, but the privacy of this design is relatively poor, and it requires neatness. It is relatively high and needs to be taken care of regularly, otherwise it is easy to have a layer of dust and the clothes are in a mess, which also affects the appearance.

4. Door curtain design, install the door curtain directly in the open wardrobe to block the wardrobe. This design is more cost-effective, ventilated and breathable, and the clothes are less likely to get moldy.