Three major characteristics of medical doors

Feature 1: Doors and door frames must be firmly fixed

One ​​of the biggest characteristics of medical doors is that they open and close frequently. Even opening and closing hundreds of times a day. If the door frame and frame are not strong enough, the application of medical doors will undoubtedly be difficult. This issue was taken into consideration at the beginning of the design of the medical door. Two high-carbon steel square tubes are designed inside the door frame to avoid door frame deformation caused by frequent use. The doors and windows of medical doors should use solid wooden boards as the support points of the columns to avoid deformation of the door frame that may endanger the normal use of the medical door.

Feature 2: Anti-collision, Anti-scratch and anti-corrosion

The inner door of the hospital will inevitably be hit by hard objects such as beds and wheelchairs. Sometimes the impact is very obvious. In addition, the hospital is a public place, and kicking and slamming doors are inevitable. The use of such violent behaviors will inevitably make the inner doors unusable. Every day in hospitals, disinfectants are used to corrode doors, easily removed and discolored.

In addition, the sweat on human hands is also severely eroded. There are quite a lot of visitors in the hospital. Excessive sweat will undoubtedly cause the inner door to fade. The medical door of the professional operating room adopts the new \”antibacterial and fireproof safety HPL board\” \”.This This kind of material is not only scratch-resistant and impact-resistant, but also has outstanding wear-resistant and scratch-resistant effects. It is also corrosion-resistant and can be opened and closed hundreds of thousands of times.

Feature 3: Moisture-proof and waterproof

Daily hospital cleaning work is also a big test for medical doors, so airtight doors must have excellent moisture-proof properties. Sealed doors have excellent moisture-proof solutions in locations that are prone to absorbing moisture. The two pieces of the door frame The mullion is close to the floor and is covered with moisture-proof edges, and the side panels of the door frame are covered with moisture-proof boards, so that the medical door can adapt to the climate environment of different regions.

　Medical doorIt must be strong, shock-proof, scratch-proof, corrosion-proof, moisture-proof and waterproof. This is a very basic requirement. Therefore, when purchasing medical doors, you should choose carefully to ensure that the door body is of good quality. Only in this way can medical doors last longer.