Detailed explanation of industrial lifting door remote control and door control panel failures

Detailed explanation of several solutions to industrial lifting door remote control and door control panel failures:

Industrial lifting doors are commonly used facilities in enterprises and are suitable for It is suitable for large warehouses such as food, medicine, electronics, printing, supermarkets, etc. Industrial doors are easy to operate. You only need to press a few buttons to control the lift switch. However, industrial door controllers sometimes malfunction. So, what should be done when there is a problem with the industrial door remote control? The editor of Qishli will solve this problem for you below.

(1) The industrial door remote control operates normally, but the door control panel cannot operate.

Solution:

1. First confirm whether the button on the door control panel is on. If the light is not on, turn off the motor. Remove the neutral wire from the terminal and use a wire to touch both terminals at the same time to short-circuit the red and white terminals. If the motor turns, there is nothing wrong with the motor.

2. If the motor does not run, check the door control panel for wiring errors, short circuits under the U-shaped nails, or broken wires. If all wiring connections are good, read the installation instructions again.

(2) The industrial door control panel operates normally, but the remote control cannot operate.

Solution:

1. Replace the battery if necessary. If you have two or more remote controls and only some of them can be used, please re-match the codes.

2. If all remote controls have power, the remote controller needs to be replaced.

(3) Industrial door remote controls and door control panels cannot be used normally.

Solution:

1. First we needCheck the industrial door motor to see if it is powered on, plug a light into the socket. If the light does not come on, it means the power is not turned on. You can check the fuse box or circuit breaker for any abnormalities. If it\’s winter, check to see if there\’s ice or snow under the door. If so, clear the obstruction under the door. Secondly, check whether the spring is abnormal or broken.

2. The quick release handle can only be used by professionals when installing and maintaining the operation of the door, and can only be used when the door has been locked and there is no danger of falling under its own weight. This handle can be released only by pressing down. It is strictly prohibited to release this handle during operation.

3. ​​Consider items (1) and (2) comprehensively.